[SN JD15018437] USED Fender / Classic 70s Tele Ash Rosewood Fingerboard Natural MOD [3.52 kg / Manufactured in 2015] Fender [08]

Ishibashi Music Corporation. Verified independent store

→

This is a Fender Japan Exclusive Classic '70s Telecaster with an ash body and rosewood fingerboard, manufactured in 2015. Featuring the distinctive modern logo, this model follows the classic 70s style. The pickguard has been replaced, the rear pickup has been swapped for a Fender USA model, it features a series wiring configuration with a Tone-Pull switch for consistent tone across all positions, and the bridge unit has been upgraded to a GOTOH brass-saddle model.Like the ’52-style model, it features an ash body, a slim C-shaped maple neck, a 7.25R rosewood fingerboard, and GOTOH Rotomatic tuners. With its striking appearance, this classic 70s Telecaster in ash/rosewood is highly recommended not only for lead guitarists but also for vocalists and guitarists who focus on strumming, thanks to its crisp tone. Signs of use (such as scuffs, wipe marks, picking marks, and tarnish or pitting on metal parts and screws, etc.) are visible. It was fully set up upon arrival (cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment, fret leveling, nut slot correction, saddle slot correction, PG screw hole correction, and rear pickup rewinding). The frets are at a height that poses no issues for playing, and the truss rod has been checked up to 60° in both directions and is in good condition (slightly tight). Condition Grade: B+: Some minor scratches, but no issues for normal use Serial Number: JD15018437 Year of Manufacture: 2015 Country of Manufacture: Japan Case: Soft case Weight: 3.52 kg Truss Rod: Note: Tested up to 60 degrees to the left and right with no issues (some play remaining) Fret Wear: Within normal range; fret height is sufficient for playability Nut width: 41.2 mm Neck Shape: Slim "C" Neck thickness near the 1st fret: 21.5 mm Neck thickness near the 12th fret: 22.9 mm Scale: 648 mm (25.5") Radius: 184 mm (7.25") Strings at Setup: ERNIE BALL 2221 / .010-.046 set Repairs and Maintenance Performed: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, fret leveling, nut slot correction, saddle slot correction, PG screw hole correction, rear pickup rewinding * As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance. * Any listed measurements for the truss rod, remaining fret height, string action, etc., were taken by our staff during setup and are subject to change due to environmental factors such as climate and humidity. These measurements are intended as a reference at the time of purchase; we cannot guarantee that the values will be identical when the item arrives at your location. * This is a one-of-a-kind item that is listed simultaneously on multiple marketplaces, including our in-store display. We strive to promptly remove product listings once an item is sold, but updates may not always be in real time. We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding. Show more