This is a cab only with back plate, seats, dash with steering wheel, rear window trim, and shark tooth grill. This cab is pinched and fenders are opened up to take to 4.9 ruptures with out rubbing. The width of the cab at the sliders is 145mm. This kit will also include our MagPodz for mounting to a Titan Chassis. Class N35 Neodymium Magnets, 3x15mm X8 are included. Our MagPods do have multiple screw holes and are able to be trimmed, this may help you with mounting to other chassis but will be a "figure it out" on your own type deal as it is with most other aftermarket bodies. MagPods and BackPlate take standard M3 screws for mounting. The other parts get glued in, we prefer using e-6000/shoe goe for magnets and parts. Our 10th scale bodies will be made in our carbon fiber material only for now. This has proven to be a stronger option with a great resistance to heat. With that said, what is made with heat can be destroyed with heat. Our color options are also being tested and may be an option in the future. For gluing parts to the body, you can use a CA glue, or my favorite is Shoe Goe or e6000. The rubbery type glue helps with impacts and is also great for Magnets. CarbonFiber colors have a print quality increase, including higher temp and impact resistance. It also provides a textured matte finish, the raw prints can be painted without prep if desired. For normal paint preparation, we recommend starting with 220 Wet Sand with a flexible block, then move to 320 Wet Sand. Use a high fill sandable primer, and wet sand with 400, repeat last step until desired finish is achieved before base coat. When choosing a color and planning to paint, you have options! You can pick the same color as your paint, so scratches will be less visible!Bodies do require prep if planning to paint. For prep we reccomend starting with 220 Wet Sand with a flexible block, then move to 320 Wet Sand. Use a high fill sandable primer, and wet sand with 400, repeat last step until desired finish is achieved. ***All products are made to order. Please check the header on the main page for approximate lead times. Thank you for your support and patience - FlubRC
