Description The Stamp-S3 socket kit is a 1.27mm surface-mount socket set for integrating a Stamp-S3 module into custom PCB designs. It combines 17-pin and 11-pin SMD sockets so a board can provide the matching mechanical and electrical interface for compact embedded builds. This Stamp-S3 socket kit is useful when a project needs repeatable module mounting, cleaner board assembly, or easier replacement during testing. The low 4.6mm socket height keeps the finished board compact while still supporting practical prototype and small-batch PCB work. Features 1.27mm pitch surface-mount socket set for Stamp-S3 PCB integration. Includes matched 17-pin and 11-pin sockets for the Stamp-S3 module layout. 4.6mm socket height for compact embedded hardware designs. Designed for PCB DIY, prototype boards, and custom expansion hardware. Stamp-S3 socket kit package provides ten complete socket sets. Specifications Type Surface-mount socket set for Stamp-S3 PCB designs Socket type 17Pin / 11Pin Pitch 1.27 mm Socket height 4.6 mm Operating temperature -40°C to 105°C Soldering temperature 230°C for 30-60 seconds / 260°C for 10 seconds Socket dimensions 22 x 4.6 x 3.5 mm for 17P, 14 x 4.6 x 3.5 mm for 11P Net weight 0.4 g for 17P / 0.1 g for 11P Package size 136 x 92 x 13 mm Set weight 6.7 g Package weight 8.7 g Applications PCB DIY projects using the Stamp-S3 module. Custom controller boards, compact IoT nodes, and embedded expansion boards. Prototype layouts that need repeatable module installation during testing. Small-batch boards where the Stamp-S3 socket kit helps standardize assembly. Product List 10 x Surface-mount sockets (1.27mm-17Pin) 10 x Surface-mount sockets (1.27mm-11Pin) Other Content Before soldering, verify the 17-pin and 11-pin socket orientation against the PCB footprint. Use the listed soldering temperature limits and inspect alignment after placement, especially on compact boards where the module position affects enclosure clearance. Resources Documentation FAQ What module is this socket set designed for? It is designed for Stamp-S3 projects that need 1.27mm SMD sockets on a custom PCB. What is included in one pack? One pack includes ten 17-pin surface-mount sockets and ten 11-pin surface-mount sockets. What soldering temperature should be used? The listed soldering limits are 230°C for 30-60 seconds or 260°C for 10 seconds.
