1011 Kyoritsu Compact Digital Multimeter With Temperature High performance and wide range digital multimeter from the world class manufacturer, Kyoritsu. Temperature measurement, selectable for ºC and ºF 6040 counts with Bar Graph display MIN/MAX function enables to record min & max value REL(relative value) function to indicate the measurement variation Designed to international safety standards IEC61010-1 CAT.III 300V / CAT.II 600V Included accessories: Test leads, temperature probe, batteries & manual. FEATURES: 6040 counts with Bar Graph display MIN/MAX function enables to record min & max value REL(relative value) function to indicate the measurement variation: Saving the initial value at the start of measurement as a reference value(= zero). The difference between the later measured values andthe reference value is indicated on the display Temperature measurement, selectable for ?C and ?F (KEW 1011) supplied with K-type temperature probe (8216): -50~300 ?C (-58~572?F) DUTY function (It is possible to measure Pulse width / Pulse period) Data Hold function, Auto Power Off function Continuity with buzzer and Diode Check function Capacity measurement of capacitors Current ranges are protected by fuses (600V ceramic) Designed to meet international safety standards: IEC61010-1 CAT.III 300V / CAT.II 600V SPECIFICATIONS: DC V 600.0mV/6.000/60.00/600.0/600V (Input Impedance: 10MΩ, 100MΩ only 600mV) t (600.0mV/6.000/60.00/600.0V) t (600V) AC V 6.000/60.00/600.0/600V (Input Impedance: 10MΩ) t (6.000/60.00/600.0V) t (600V) DC A 600/6000µA/60/600mA/6/10A t (600/6000µA/60/600mA) t (6/10A) AC A 600/6000µA/60/600mA/6/10A t (600/6000µA/60/600mA) t (6/10A) Ω 600Ω/6/60/600kΩ/6/60MΩ t (600Ω/6/60/600kΩ/6MΩ) t (60MΩ) Continuity buzzer 0~600Ω (Buzzer sounds below 100Ω) Diode Check 2.8V Release Voltage:Approx. 0.4mATest Current Capacitance 40/400nF/4/40/400/4000µF Frequency 10/100/1000Hz/10/100/1000kHz/10MHz DUTY 0.1~99.9% (Pulse width/Pulse period) t (~10kHz) Temperature -50~300ºC (-58~572ºF) (with the use of Temperature probe 8216) Note: KEW 1011 can measure max. 700ºC In order to measure over 300ºC, please use a K-type temperature probe available in the market. Display 6040 Counts Withstand Voltage AC 3700V / 1min. Applicable standards IEC 61010-1 CAT.III 300V Pollutiondegree 2 IEC 61010-1 CAT.II 600V Pollution degree 2 IEC 61010-031 IEC 61326 Power Source R6P (1.5V) × 2 (Auto-power-OFF within 15 minutes) Dimensions 161(L) × 82(W) × 50(D)mm Weight Approx. 280g Accessories KTL04 (Test Lead) 8216 (K-type Temperature probe) 0.8A/600V (Ceramic Fuse) × 1 10A/600V (Ceramic Fuse) × 1
