WHAT STANDS OUT: All-in-one 10mm connector kit: Connectors for most single-color strip layouts in one pack. Solderless clasp design: sharp copper pins connect through the strip pads for a secure, tool-free connection. Flexible: 5" connectors bend around corners, gaps, and obstacles without stressing the strip. PRODUCT DETAILS: The 2Pin 10mm LED Connector Kit is a complete, solderless solution for connecting and extending 10mm single-color LED strips. Instead of juggling multiple accessories, installers get gapless connectors, flexible jumpers, pigtails, and DC adapters in one organized kit designed to handle the most common layout scenarios. Each connector uses a copper needle clasp that pierces the strip’s contact pads when the housing is closed. This creates a firm electrical connection without stripping insulation, soldering, or special tools, making on-site adjustments and repairs significantly faster. The kit is compatible with 10mm 2-pin COB strips, CSP strips, and 2835 LED strips in 12V or 24V systems, including many indoor, outdoor, and waterproof versions (strip’s own IP rating still applies). Flexible 5" any-angle connectors bridge gaps, turn right-angle corners, or route around obstacles while keeping light output continuous. Gapless strip-to-strip pieces maintain a clean, near-seamless look between sections, while pigtails, DC jack connectors, and a 2-way DC splitter simplify transitions to power supplies, dimmers, or branching runs. All connectors are rated for indoor, dry-location use with a 1-year warranty. Voltage rating: 12–24V DC constant voltage Max current: 5A per connector Strip compatibility: 10mm wide, 2-pin COB, CSP, and 2835 single-color strips (indoor, outdoor, waterproof) IP rating: IP20 – indoor, dry-location use Connector head dimensions: approx. H 2 cm × L 20 cm × W 11 cm (head assembly) Color / material: clear plastic housing with internal copper pins WHAT'S INCLUDED: 1 × 2-way DC jack splitter – branches power from one DC source to two runs. 2 × strip-to-wire pigtail connectors – attach 10mm strips to bare low-voltage wiring. 2 × strip-to-DC female jack connectors – connect strips directly to standard DC barrel plugs. 4 × 5" any-angle strip-to-strip connectors – flexible jumpers for corners, gaps, and offsets. 6 × gapless strip-to-strip connectors – near-seamless in-line joins between 10mm strip sections. FREQUENTLY ASKED QUESTIONS: Q: What size LED strip lights are compatible with this connector kit?A: The kit is designed for standard 10mm wide, 2-pin single-color LED strips. It works with 10mm COB strips, CSP strips, and 2835 LED strips in 12V or 24V constant-voltage systems, including many indoor, outdoor, and waterproof models. Q: How many amps can these connectors handle?A: Each connector in the kit is rated up to 5 amps at 12–24V DC. This rating covers most typical 10mm single-color strip and COB runs; always confirm the total load per run stays within both the strip and connector specifications. Q: Do I need tools or soldering to install the connectors?A: No. All pieces in the kit are solderless and use a clasp mechanism with sharp copper pins that pierce the strip pads when closed. Installers simply align the strip, close the housing, and verify the connection—no soldering or special tools required. Q: Can these connectors be used outdoors?A: The connectors themselves have an IP20 rating, which means they are intended for indoor, dry-location use only. They can be attached to outdoor-rated or waterproof strips, but the connector area must be protected in a suitable enclosure if exposed to moisture. Q: Can I cut the LED strip and reuse a connector on the new section?A: Yes. Connectors in this kit are reusable. After cutting the LED strip at a marked cut line, the same connector can be opened and re-clamped onto the new section, provided the copper pads are clean, aligned, and fully seated under the pins. Q: Is it normal for the connectors to feel warm during operation?A: A slight warmth is normal when the connectors operate within their 5A, 12–24V DC rating. Mild temperature rise is expected and not a concern, as long as current limits are respected and there are no signs of discoloration or damage. Q: What is the warranty period for this connector kit?A: The 2Pin 10mm LED Connector Kit includes a 1-year warranty, providing coverage for typical residential and light commercial use when installed and operated within the stated electrical and environmental specifications SHIPPING DETAILS: Standard Shipping (3-5 Days) - Shipping cutoff 3PM (PST). FREE ground shipping (UPS or FedEx) on orders of $199 or more Standard Shipping: Flat Rate $9.99 - Cutoff 3PM (PST) 2-Day Shipping: Rate Based on Weight - Cutoff 2PM (PST) Overnight Shipping: Rate Based on Weight - Cutoff 2PM (PST)
Related
Related
Related
Related