10W Bass Shakers – Precision Haptic Feedback for Sim Racing Controls Transform how your sim rig feels with compact 10W bass shakers, purpose-built to add realistic vibration feedback directly to your pedals, shifter, and handbrake. Instead of sending all vibration through your seat or chassis, these shakers place feedback exactly where your hands and feet interact with the car—helping you feel more detail, react faster, and drive with greater confidence. Why control-mounted haptics matters: In real cars, grip, ABS, drivetrain load, and surface texture are sensed through your hands and feet. By mounting tactile transducers to your controls, you get localized, instant feedback that’s easier to interpret than seat-only vibration. The result is clearer cues under braking and throttle, more believable mechanical feel in shifting, and better timing and consistency in rally/drift scenarios. Why Add Bass Shakers to Pedals? In real race cars, critical information comes through your feet. Pedal-mounted bass shakers recreate this by delivering localized feedback you can feel instantly: ABS activation through the brake pedal Wheel lockups and threshold braking cues Traction loss and wheelspin through the throttle Road texture, kerbs, and bumps under your feet This direct feedback helps you react faster and modulate inputs more precisely—especially under heavy braking and corner exit. Bring Your Shifter to Life Mounted to a shifter, a 10W bass shaker adds: Mechanical engagement feel during gear changes Drivetrain vibration under load Engine and RPM feedback synced to the car Every shift feels more physical and satisfying, replacing the “dead” feel of static hardware and improving immersion in H-pattern and sequential setups. Realistic Handbrake Feedback For drifting and rally setups, handbrake-mounted shakers provide: Rear wheel slip feedback Surface vibration on gravel, dirt, or tarmac Immediate tactile response when locking the rears It adds confidence and realism when timing slides, snap oversteer corrections, or tight hairpins. Small Power, Big Detail With a 10W output, these shakers are ideal for control-mounted applications: Strong, detailed vibration without overwhelming force Low noise compared to large chassis shakers Perfect for apartments and shared spaces Minimal power requirements—easy to drive with compact amps When paired with software like SimHub, each shaker can be independently tuned by effect, frequency, and intensity for clean, separated feedback across your controls. Key Benefits at a Glance Localized feedback exactly where it matters Improved immersion and car control Easy to mount to pedals, shifters, and handbrakes Clean, precise vibration without muddy overlap Realistic feedback inspired by real race cars Ideal For Sim racers upgrading beyond seat-only haptics GT, Formula, Rally, and Drift drivers Anyone wanting more realism without adding noise or bulk Designed for Simulation & Gaming Immersion Experience a deeper level of immersion with the Trak Racer Engineered Bass Shaker Kit, purpose-built for sim racing, flight simulation, and gaming. This updated kit includes two 10W tactile bass shakers, engineered specifically to reproduce low-frequency vibration so you don’t just hear the game — you feel it. From road texture and kerb strikes in sim racing to turbulence, landings, explosions, and weapon recoil in gaming and flight simulation, this bass shaker kit transforms audio signals into physical feedback, bringing your simulator to life. What’s Included 2 × 10W Low-Frequency Bass Shakers designed specifically for simulation and gaming 2 m / 6.374 ft Speaker Wire Dedicated mounting brackets and a full fastener kit for secure attachment Installation tools included for quick and easy setup Designed specifically for simulation and gaming applications Optimised to capture and reproduce low-frequency effects (LFE) Each shaker is tuned to operate in the 33 Hz to 100 Hz range, allowing you to feel subtle surface detail as well as powerful impacts, vibrations, and effects. Built for Sim Racing, Simulation & Gaming The Trak Racer Bass Shaker Kit is engineered to deliver tactile feedback where it matters most — directly through your seat, cockpit, or simulator frame. By converting low-frequency audio into vibration, the system enhances realism across a wide range of applications: Sim racing (kerbs, bumps, wheel slip, engine vibration) Flight simulation (runway rumble, turbulence, landing impact) Gaming (gunfire, explosions, environmental effects) Motion platforms and racing simulators Compatible with popular titles including iRacing, Assetto Corsa, Assetto Corsa Competizione, rFactor, F1 simulation, flight simulators, and modern PC/console games. Compact Power, Precision Feedback Each tactile transducer features a compact 98 × 98 × 31 mm design, making it easy to install under seats, on simulator frames, or directly onto cockpit structures where traditional subwoofers are impractical. With medium power handling (10W nominal, 20W peak) and an 8Ω impedance, these bass shakers are ideal for use with dedicated low-frequency amplifiers, allowing clean, distortion-free tactile feedback even during extended sessions. Easy Integration & Installation The bass shakers are designed for straightforward installation on: Simulator seats Cockpit frames Motion platforms Chairs and gaming rigs For best results, pair with a dedicated bass shaker amplifier (such as Trak Racer’s multi-channel solutions) to control intensity and frequency response independently from your main audio system. Engineered by Industry Specialists Backed by Trak Racer’s leadership in simulation hardware since 2008, and trusted through partnerships with the Alpine Formula 1 Team, Porsche, and Airbus Aircraft, this bass shaker kit reflects professional-grade engineering refined for high-performance simulation and gaming environments. Key Features Includes 2 × 10W tactile bass shakers Designed specifically for simulation and gaming Optimised for low-frequency tactile feedback (33–100 Hz) Lets you feel every bump, shot, impact, and vibration Compact design for easy seat or frame mounting Ideal for sim racing, flight simulation, and immersive gaming Enhances realism without the need for large subwoofers Built for racing simulators, cockpits, and motion rigs 1-Year Warranty (excluding normal wear and tear) Feel the game. Feel the road. Feel the impact.Built by sim racers. Proven in motorsport. Engineered for immersion. Specifications Specification Details Product Model TR-BSA10 Product Type Low Frequency Tactile Transducer / Bass Shaker Outer Dimensions 98 × 98 × 31 mm Rated AC Impedance 8 Ω ±10% (22 °C) Rated DC Resistance 7.2 Ω ±3% (22 °C) Resonant Frequency (F₀) 33 Hz ±10% Effective Frequency Range F₀ – 100 Hz Nominal Input Power 10 W Maximum Input Power 20 W Buzz & Rattle Test 8 V, 20–200 Hz Operating Condition 8 Vrms sine wave at 20–200 Hz, normal operation without distortion Polarity Positive terminal causes upward magnetic movement when 1.5 V DC is applied Magnet Ø60 × Ø32 × 8 mm Product Weight 0.35 kg Trak Racer Device Manager One App. Complete Control. Manage every aspect of your bass shaker setup with powerful yet easy-to-use software. Free Download
