The 4-20mASensors can be connected to and powered by the provided terminals on the 4-20mA Adapter board. The 1132 will measure the current passing through the attached sensor and convert it to a voltage, where it can be displayed as a SensorValue by a Phidget Interface board. The 4-20 mA Adapter board internally produces +15V from the Phidget InterfaceKit’s input analog voltages which is used to power the connected sensor, eliminating the need for an external power supply. If the Adapter board is being used in very noisy environments, place a ferrite bead on the sensor current loop close to where it is attached to the 1132. Product Features Used to interface 4-20 mA sensors to an Analog Input Produces 15 Volts to power sensors Can interface sensors with very long wires The adapter is non-ratiometric Product Specifications Characteristic Value Inrush Current (hot plug) 160 mA Max Output Impedance 1K Ohms Device Current consumption (Loop=22 mA) 130 mA Device Current Consumption (Loop=4 mA) 18.4 mA Device Current Consumption No Load 1.84 mA Power Supply Range 4.75 VDC to 5.25 VDC Internally Generated Voltage 15V Maximum Output Error ±1.2% Maximum Capacitive Load (Sensor) 1.5μF Code Samples For This Product C# (Windows) This adapter connects to an Analog Input on the: 1018 - PhidgetInterfaceKit 8/8/8 1019 - PhidgetInterfaceKit 8/8/8 w/6 Port Hub 1070 – PhidgetSBC 1203 – PhidgetTextLCD Comes packaged with: 3002 – 60cm Sensor Cable Resources Product Manual
