The Richter-12 replacement woofer delivers professional-grade sound for musicians, sound engineers, and venue owners looking to upgrade existing cabinets or build custom PA systems. This 12-inch driver handles the demanding mid and low-frequency work that defines quality live sound reproduction. Built around a robust 3-inch voice coil and 50-ounce magnet assembly, the Richter-12 produces 250 watts RMS with 500 watts peak power handling. The die-cast aluminum chassis provides the structural integrity needed for high-output applications, while the paper cone with cloth surround delivers the warm, natural tone that cuts through dense mixes. Operating at 8 ohms with 98 dB sensitivity, this driver works efficiently with most amplifiers and delivers strong output without excessive power requirements. The 55 Hz to 5 kHz frequency response makes it ideal for full-range monitor applications or as the foundation driver in two-way systems. Install the Richter-12 in vented enclosures for live sound reinforcement, stage monitors, or bass guitar cabinets. It handles small to medium venues effectively, supporting crowds up to 200-300 people when properly configured in a complete PA system. The driver also works well for musicians building custom bass guitar rigs or upgrading existing monitor wedges. Standard mounting requires an appropriate enclosure with proper internal volume calculations. The driver ships ready to install with all necessary specifications for cabinet builders. Seismic Audio backs the Richter-12 with a full one-year warranty and ships directly from our warehouse for fast delivery to your project. Technical Specifications Spec Value Driver Size 12 inches Power (RMS) 250 watts Power (Peak) 500 watts Impedance 8 ohm Frequency Response 55 Hz - 5 kHz Sensitivity 98 dB Voice Coil 3 inches Magnet 50 ounce Chassis Die cast aluminum Cone Material Paper with cloth edge Warranty One year Recommended For PA upgrades, monitors, bass guitar, custom builds Frequently Asked Questions What size venues can the Richter-12 handle? When properly installed in a suitable enclosure and powered appropriately, the Richter-12 can effectively cover small to medium venues with 200-300 people. For larger spaces, multiple drivers or additional subwoofer support may be needed. The 98 dB sensitivity means it works efficiently without requiring massive amplifier power. Can I use this driver for bass guitar applications? Yes, the Richter-12 works well for bass guitar cabinets. The 55 Hz low-frequency response and robust 3-inch voice coil handle the fundamental frequencies and dynamic range that bass guitars produce. Many builders use this driver for custom bass rigs or to upgrade existing bass cabinets that need replacement drivers. What type of enclosure works best with this driver? The Richter-12 is recommended for vented (ported) enclosures rather than sealed designs. Vented enclosures allow the driver to achieve its full low-frequency potential and handle more power efficiently. Proper internal volume calculations are essential for optimal performance, so consult standard speaker design resources or software. Is this driver suitable for full-range PA use or do I need a tweeter? The Richter-12 covers 55 Hz to 5 kHz, which handles most vocal and instrument fundamentals but rolls off before the highest frequencies. For full-range PA applications, you'll want to add a compression driver and crossover around 2-3 kHz. For stage monitors or bass-heavy applications, it can work as a single driver. How does the power handling compare to the original drivers in my cabinets? At 250 watts RMS and 500 watts peak, the Richter-12 offers substantial power handling that exceeds many factory drivers in budget and mid-range PA cabinets. Check your original driver specifications to ensure the impedance matches (this is 8 ohm) and that your amplifier can properly drive the replacement. The increased power handling often allows for higher output levels than stock drivers.
Related
Related
Related
Related