Kit includes #3930 11 Pc. Brake Bleeding Adapter Pro Series and #7015 Pressure Brake Bleeder Tank Pro Series feature all metal construction adapters for servicing Toyota, Lexus, Hyundai, Kia, Honda, Acura, Mitsubishi, Nissan, Suzuki, Mazda, Ford, Lincoln, Tesla, Chevrolet, Cadillac, Buick, Chrysler, Dodge, Jeep, Ram, BMW, Land Rover, Fiat, Alfa Romeo, Volvo, Volkswagen, Audi & Porsche Each adapter is equipped with standard European (Nitto) fittings, but also includes standard National (Melton) fitting adapters for use with other pressurizing components 7015 Pressure Bleeder Tank includes a built-in pressure gauge and 10 Ft. hose with (Nitto) quick-disconnect coupler for long reach Adapters included in #3930 set: 3931 - Brake Bleeder Adapter - Toyota 3932 - Brake Bleeder Adapter - Hyundai, Mitsubishi 3933 - Brake Bleeder Adapter - Honda 3934 - Brake Bleeder Adapter - Euro 3935 - Brake Bleeder Adapter - GM, Ford, Mazda, Suzuki 3936 - Brake Bleeder Adapter - Nissan 3937 - Brake Bleeder Adapter - Chrysler, Dodge, Jeep 3938 - Brake Bleeder Adapter - Tesla X & S, GM 3939 - Brake Bleeder Adapter - Tesla 3 & Y, GM 3940 - Milton M-Style Connector 7043 - Quick Coupler Instructions Select the appropriate brake bleeder adapter for your vehicle's make and model from the kit. Refer to the product description for which adapter fits each vehicle brand. Attach the brake bleeder adapter to the brake fluid reservoir on the master cylinder. Make sure it fits snugly. Attach the quick connect end of the pressure bleeder hose to the top of the brake bleeder adapter. Fill the pressure bleeder tank with new brake fluid to the "Full" line. Attach the tank end of the pressure bleeder hose to the tank's quick coupler. Pressurize the tank to 10-15 PSI by pumping the handle on top. Open the brake bleeder valve on the caliper/cylinder. Fluid will flow from the tank through the hose into the brake system, pushing out old fluid and air bubbles. Once new fluid is observed coming out, close the brake bleeder valve. This completes one brake bleed cycle. Tap the brake pedal several times and then hold it down. Open the bleeder valve again to repeat the bleeding process until clean fluid with no air bubbles comes out. When finished with one brake caliper/cylinder, close the bleeder valve. Move the pressure bleeder hose and catch bottle to the next caliper/cylinder. Open the valve and repeat steps 7-9 until all brakes are bled. The brake bleeder adapter stays attached to the master cylinder reservoir. When finished, release pressure in the tank and disconnect all equipment. Top off brake fluid level in master cylinder as needed. Test brakes for proper operation before driving.
Related
Related
Related
Related