Product Info Please select Body Colour from drop down menu Please select LED Colour from drop down menu T-A07 Series Momentary On-Off Button/Switch with LED - Pre-Wired (On)-Off Momentary SPST switch - Ring LED illumination Blue or Red LED Available - each unit has only 1 LED colour LED power separate to switching power allowing to multiple wiring setups Push In and Hold for On, Release for Out and Off - Momentary FunctionThis switch will not lock/hold in the On position High Button design allows for easy operation in a small/compact unit Pre-wired 20AWG - 120mm length approx. Easy installation, 12mm panel mount Lock nut, O-ring included Match this switch with one of our toggle panelsIncludes: 1 x T-A07 Series 12mm On-Off Push Button Switch - Pre-Wired 1 x Lock Nut 1 x O-Ring Description Our 12mm Aluminium On-Off Push Button Switch range is an ideal component commonly used in a variety of applications, such as automotive, PC, PC simulation, or DIY projects. The switch features a round, 7.5mm diameter button that can be pressed to activate or deactivate an electrical circuit where momentary function is required. It has a sleek and durable aluminium body that is resistant to corrosion and wear. The switch is designed to be mounted through a 12mm hole (panel mount), and it can be secured using a locking nut that is included. The LED illumination, available in both Blue and Red, offers great visibility and a stylish look. The LED power supply is separate to the switching connections of the switch, allowing for multiple LED illumination options. The LED can either be powered at all times, connected to dash/nights lights or wired into the switch output (+) to allow for LED illumination only when the switch is On. The unit operates as an On-Off Normally Open/NO design momentary type switch, which means that it has two states: On when the button is pressed to supply power and complete the circuit, and Off when the button is pressed again to disconnect the circuit. It is rated for a maximum voltage and current of 12V DC/3A. Specifications Maximum Rating: 3A@12vMounting Hole Diameter: 11.6mm-12mm (12mm panel mounting)Button Size Diameter: 7.5mmFace Size Diameter: 13.8mmWiring: 20AWG, 120mm length (approx.)Depth (from back of mounting face, excluding terminals/wire): 22.5mmIP65 Rating Wiring 4 Pin Wiring These units are designed and assembled with LED illumination power separate from the switching Power In/Power Out switch circuit. LED positive power is supplied separate via Red Wire, with the LED ground/earth via the Black Wire. LED will illuminate at all times power is supplied to Red Wire. For LED illumination only when the switch is "On", connect Red Wire to switch output. Link to wiring instructions included with all orders. CLICK HERE to view our Wiring Instructions page.
