WHAT STANDS OUT: Slim profile: Long, low-profile housing tucks easily into cabinets, coves, and tight junction spaces, reducing layout headaches for electricians and cabinet builders. Smooth dimming: Electronic S-Series design delivers stable, flicker-free dimming with many common wall dimmers, ideal for kitchens, display cases, and accent lighting. Sized for higher loads: 100-watt output comfortably supports longer or higher-density 12V strip runs, avoiding the need for multiple smaller drivers or oversized power supplies. PRODUCT DETAILS: Engineered by HitLights for residential and commercial projects, this slim S-Series electronic driver delivers smooth, flicker-free dimming when paired with a standard in-wall dimmer. It is ideal for under-cabinet lighting, coves, shelves, display cases, and other low-voltage accent lighting installations. 12V DC, 100W (8.3A) output for single-color LED strip lights Full-range 0–100% dimming with compatible wall dimmers Slim linear housing to fit in tight spaces and enclosures UL Listed Class 2 and FCC compliant for safety and reliability The driver accepts 120 VAC input (108–132 VAC, 50/60 Hz) and converts it to a regulated 12V DC output up to 100 watts for LED strip loads. Efficiency is ≥84% at maximum load with a power factor of 0.96 and THD ≤20%, helping minimize wasted energy and electrical noise on the line. Integrated protection against short circuit, over-voltage, and thermal runaway supports long-term reliability in demanding installations. Unlike non-dimmable plug-in adapters, this unit is hard-wired and compatible with a wide range of forward-phase and reverse-phase dimmers, including Triac, MLV, and ELV units from brands such as Lutron and Leviton, allowing lighting control from a standard wall location. The slim enclosure (approx. 12.9 x 1.2 x 0.86 in, IP20) fits easily in cabinets, junction spaces, and other dry interior locations. With working humidity from 20–90% non-condensing and a temperature range from roughly -40°C to +60°C, it is suitable for a wide range of indoor environments. A 6-year warranty provides additional peace of mind for integrators, contractors, and homeowners planning long-life LED installations. Designed for single-color 12V LED strips, this driver is an appropriate choice when a compact, dimmable, UL Listed Class 2 100W power solution is required. WHAT'S INCLUDED: 1 × 12V 100W S-Series Slim Dimmable LED Driver, UL Listed Class 2 FREQUENTLY ASKED QUESTIONS: Q: What is this 12V 100W slim dimmable LED driver used for?A: It is a 12V DC, 100W electronic Class 2 driver designed to power and dim single-color 12V LED strip lights in indoor installations. Typical uses include under-cabinet lighting, cove lighting, shelving, and other accent lighting controlled from a wall dimmer. Q: What are the input and output specifications for this driver?A: The input is 120 VAC (approximately 108–132 VAC, 50/60 Hz), and the output is 12V DC at up to 100 watts, or 8.3 amps of current. This rating supports longer runs or higher-load 12V single-color LED strip installations. Q: How does the driver dim, and which wall dimmers are compatible?A: The driver supports 0–100% dimming and is compatible with forward-phase, reverse-phase, Triac, MLV, and ELV dimmers. It works with many Lutron dimmers (such as Ariadni, Diva, Nova T, Skylark) and Leviton dimmers (such as Mural, SureSlide, ToggleTouch, Vizia), so installers can match common dimmer families. Q: How do I connect this driver to power and LED strip lights?A: For AC input, connect the black wire to live (hot), white to neutral, and green to ground. On the low-voltage side, connect the red output lead to the positive terminal of the LED strip and the blue output lead to the negative terminal, following standard low-voltage wiring practices. Q: Can this driver be used outdoors or in wet locations?A: No. The driver is rated IP20 and is intended only for dry, indoor environments. For outdoor or wet-location installs, a waterproof driver with an appropriate IP rating is required. Q: Does this driver work with RGB or multi-color LED strips?A: No. This S-Series 100W driver is designed for single-color 12V LED strips only. RGB or multi-channel strips require a compatible RGB controller between the driver and the LED load to manage color channels. Q: What protections and certifications does this driver have?A: The driver includes built-in protection against short circuit, thermal runaway, and over-voltage to help safeguard both the driver and connected lights. It is UL Listed as a Class 2 power supply and FCC compliant, aligning with safety and electromagnetic compatibility requirements. Q: What are the dimensions and warranty for this 100W slim driver?A: The enclosure measures approximately 12.9 x 1.2 x 0.86 inches, making it easy to conceal in cabinets, valances, or junction areas. The driver carries a 6-year manufacturer warranty for residential and commercial LED strip lighting projects. SHIPPING DETAILS: Standard Shipping (3-5 Days) - Shipping cutoff 3pm (PST). FREE ground shipping (UPS or FedEx) on orders of $199 or more Standard Shipping: Flat Rate $9.99 - Cutoff 3PM (PST) 2-Day Shipping: Rate Based on Weight - Cutoff 2PM (PST) Overnight Shipping: Rate Based on Weight - Cutoff 2PM (PST)
Related
Related
Related