Highlights: 800 ft. of 7/16 in. Traceable fiberglass rod With copper trace wire Rod marked every 5 ft. with metric markings every 1 m Used For: Non-invasive locating and mapping of underground ducts and pipes Locating sewer laterals and confirm no cross bore has occurred Locating ductile iron, plastic, tile, and concrete pipe Use in conduit with a 4 in. or larger diameter Detectable at depths up to 10 ft. when energized with a signal transmitter and traced with a hand-held receiver Features: 9 in. bend radius Supports full-line tracing using an electromagnetic signal Reduces time by helping eliminate digging and trenching Includes male end ferrule, pulling eye, and accessory kit attached to the frame The Jameson 13-716-800M Duct Hunter Rodder is a traceable fiberglass duct rod built for non-invasive locating and mapping of underground ducts and pipes in larger conduit systems. It includes 800 feet of 7/16-inch fiberglass rod with an integrated copper trace wire, giving you a practical way to identify sewer laterals, confirm no cross bore has occurred, and trace ductile iron, plastic, tile, and concrete pipe. Clear markings every 5 feet, along with metric markings every 1 meter, help support more accurate progress tracking during field work. The rodder is designed for use in conduit with a 4-inch or larger inside diameter and can be detected at depths up to 10 feet when energized with a signal transmitter and traced with a hand-held receiver. A 9-inch bend radius helps it move through the run while maintaining control in the line. The rodding reel supports full-line tracing through an electromagnetic signal, helping reduce time spent on exploratory digging and trenching. A male end ferrule, pulling eye, and attached accessory kit on the frame add convenience for setup and routine jobsite use. Built with a durable frame and measuring 47.5 by 44 by 20 inches, this unit combines reach, traceability, and field-ready accessories in one organized system. Its 800-foot length and 7/16-inch diameter make it well suited for crews handling underground utility locating, duct verification, and pipe path confirmation in larger pathways. For teams that need long-distance tracing with clear markings and added detection capability, The Jameson 13-716-800M Duct Hunter Rodder delivers a practical solution. Specifications: Part Number: 13-716-800M Rod Length: 800 ft (243.84 m) Rod Diameter: 7/16-inch (11.11 mm) Rod Material: Fiberglass with copper trace wire Detection Distance: 10 ft (3.04 m) Bend Radius: 9" (228.6 mm) Ideal for Conduit: With inside diameter 4 inch or larger (101.6 mm or larger) Included: Accessory Kit Dimensions: 47.5″ x 44″ x 20″ (1207 x 1118 x 508 mm) Included in these categories: Jameson Tools Jameson Tools Traceable Rodders Rodders Utility Tools
Related
Related
Related