Highlights: 400 ft. of 1/4 in. Traceable fiberglass rod With copper trace wire Rod marked every 5 ft. with metric markings every 1 m Used For: Non-invasive locating and mapping of underground ducts and pipes Locating sewer laterals and confirm no cross bore has occurred Locating ductile iron, plastic, tile, and concrete pipe Use in conduit with a 1 - 2 in. inside diameter Detectable at depths up to 10 ft. when energized with a signal transmitter and traced with a hand-held receiver Features: 4 in. bend radius Supports full-line tracing using an electromagnetic signal Reduces time by helping eliminate digging and trenching Includes male end ferrule, pulling eye, and accessory kit attached to the frame The Jameson 16-14-400M Duct Hunter Rodder provides a compact and controlled solution for locating and mapping underground ducts and pipes within narrow conduit systems. It includes 400 feet of 1/4-inch fiberglass rod with an integrated copper trace wire, enabling workers to locate sewer laterals, confirm no cross bore has occurred, and trace ductile iron, plastic, tile, and concrete pipe. Markings every 5 feet, along with metric markings every 1 meter, support consistent measurement and tracking during operation. The rodder is designed for conduit with a 1 to 2 inch inside diameter and can be detected at depths up to 10 feet when energized with a signal transmitter and traced using a hand-held receiver. A 4-inch bend radius allows navigation through tight turns and confined pathways with improved control. The rodding reel supports full-line tracing using an electromagnetic signal, helping reduce time spent on digging and trenching. Included components such as the male end ferrule, pulling eye, and accessory kit attached to the frame support efficient setup and use. With overall dimensions of 36.25 by 24 by 13 inches, this unit offers a compact footprint suited for restricted workspaces while maintaining practical reach and traceability. Its 400-foot length and 1/4-inch diameter make it great for handling precise routing in small to medium conduit pathways. For jobs requiring effective underground locating, The Jameson 16-14-400M Duct Hunter Rodder delivers a solid solution. Specifications: Part Number: 16-14-400M Rod Length: 400 ft (121.92 m) Rod Diameter: 1/4-inch (6.35 mm) Rod Material: Fiberglass with copper trace wire Detection Distance: 10 ft (3.04 m) Bend Radius: 4″ (101.6 mm) Ideal for Conduit: With inside diameter between 1 - 2 inch (25.4 to 50.8 mm) Markings: Marked every 5 ft (1.52 m) and 1 m Included: Accessory Kit Dimensions: 36.25″ x 24″ x 13″ (921 x 610 x 330 mm) Included in these categories: Jameson Tools Jameson Tools Traceable Rodders Rodders Utility Tools
Related
Related
Related
Related