Listing is for a 16oz Libbey Glass Cans UV DTF Wrap (1) UV DTF wrap designed for 16 oz Libbey Glass Cups, but may also be applied to plastic cups of varying sizes; simply measure and trim off any excess material.Size of Wrap: Approximately 9.3 in x 4.3 in. These measurements are an estimate and might vary slightly.Can be placed on glass, plastic, silicon, wood, etc. HAND WASH ONLY, do not soak. We do not advise to put in dishwasher or microwave.Please note that colors will vary compared to this image due to screen monitor.APPLICATION INSTRUCTIONS:* Clean your glass cup (do not use rubbing alcohol).* Flip the transfer over and scrape it to ensure the design transfers to the clear film correctly.* Place the transfer on the cup ensuring design is straight and positioned correctly. Please remember the adhesive is extremely strong. One the transfer sticks its almost impossible to remove.* Peel design transfer off of backing starting from the corner* Press the transfer down, working from the center outwards, pushing out any bubbles.* Once design is placed, use a squeegee over the entire design to push any air bubbles out.* Rub the entire design a few times to ensure everything adhered correctly.* Slowly peel the clear film off and you’re done!RETURNS/EXCHANGES :Due to the nature of the product, we do not allow returns or exchanges. If there is an issue with your order, please contact us!DISCLAIMER:We are not responsible for application mishaps. Make sure you are following pressing instructions.
