Manufactured by Kobo NANA ROKUNI Pre-painted 1/80(HO) person height is about 2cm size Studio NANA ROKUNI" Full Scratch Structure Size: approx. W 24 x D17 x H 81.5 mm The LEDs are CRD controlled. The LEDs are CRD-controlled and require a separate power supply of between 3 and 12 V DC to light up. Drilling of approx. 2.5mm diameter is required for installation. Note:Manually linked to the deadweight rod, the armrest is movable. Note:The colour tone of the images may vary from the actual product depending on the model and settings of your monitor. Information edited by Sakatsu Gallery The craftsmanship of the workshop NANA ROKUNI is brilliant! This is a movable, Japanese National Railways type arm tree signal. Like the real thing, the armbar switches in conjunction with the deadweight rod! This is a common armband departure signal, widely used on former Japanese National Railways after the war. This is a full scratch build from individual parts, not an assembly from an existing kit. Of course, the form is flawless. The body is made of soldered brass, delicate and strong enough to withstand movement. The ladder is made from a single piece of 0.4mm thick brass plate, with each step cut out to give a crisp, undistorted appearance. This is the first time we have built this model. This is the first time we have produced a model of this type. With a separate power supply from 3V to 12V DC, the signal is switched between red and blue by the bulbous LED and the lens on the armrest. Please note that this model is only a model and should be handled with care. (Note: This is a model and should be handled with care.
