These come with a white sublimatable middle design area and a black stitched border. They are great for garments, hats, and more! Product DetailsLength 2 1/2"Height 2 1/2"Thickness 1/32Overall Size 2 1/2" diameterMaximum Personalization Area 2 1/4" diameterColor White/BlackMaterial PolyesterGender NeutralMiscellaneous Dimensions Black border is 1/8" Download EPS template HERE SUBLIMATING ON THE PATCHESSupplies needed:- patch- sublimation transfer- teflon or scratch paper- heat tape- scratch paperHeat press settings:- temperature - 390 degrees F- dwell time - 60 seconds- pressure - mediumNote: The recommended settings above may need adjustments for best results.Settings will vary depending on the heat press brand and model ink and paperand atmospheric conditions.2nd Note: To adhere the transfer to the substrate use heat tape notrepositionable spray. Using the spray can cause the transfer to stick to thesubstrate. Only tape the edges of the batch (the black embroidered part) to prevent the tape from sticking to the adhesive backingLayer the press from the bottom pad to the top heat platen as follows:1. teflon sheet or scratch paper2. transfer with patch ON TOP (patch facing down on the transfer)3. teflon sheet or scratch paperSteps:1. Position the patch onto the transfer.2. Tape the patch to the paper. Only tape the edges to prevent the tape fromsticking to the adhesive backing.3. Place the transfer and substrate in the press onto scratch paper or teflon(patch on top of transfer facing down).4. Place the teflon sheet or scratch paper over the patch and transfer.5. Press the items using the settings listed above.6. Remove the transfer from the substrate and items from the pressimmediately. Use heat resistant gloves if necessary - the items will be veryhot.Tips:- If the image of the final product appears light increase the pressure orthe dwell time slightly (10-20 seconds).- If the image on the final product appears blurred or substrate appearsyellowed reduce the dwell time slightly (10-20 seconds). Click HERE for our blog on sublimation hat patchesATTACHING THE PATCH TO FABRICBEFORE ATTACHING THE PATCH BE SURE TO LET IT REST FOR A LEAST ONE HOUR AFTER SUBLIMATION TO ALLOW THE ADHESIVE TO RECONSTITUTE.-Attaching With a heat press - 300 degrees for 15 seconds - press from thefront side of patch-Attaching With a household iron - 300 degrees (wool setting) for 15 seconds -press from the back side of the fabric.Patches can be dry cleaned or washed in a washing machine with cold water -air dry.
