note: This product does not include a camera. Product Specifications（without camera） Colors: Black or Silver Material: CNC Aluminum Alloy Motor: 2208 KV80 Brushless Motor Control Angles: Pitch (-90° to +90°) / Roll (-45° to +45°) Control Mode: Roll/Pitch Camera Compatibility: GoPro 3/3+/4, SJCAM, Hawkeye, Xiaomi Yi, etc. (60-100g cameras) Control Board: BGC3.0 Brushless Controller Software: BGC2.2 Battery Connector: JST/XH-2.54 Power: 12V (3-cell LiPo battery) Compatibility: DJI Phantom 1/2, DIY drones Weight: 170g Package Size: 125mm × 125mm × 105mm Precautions: Recommended Power Supply: 12V (3-cell LiPo battery). Secure Camera Mounting: Ensure the GoPro is firmly fixed on the gimbal, with no looseness. Camera Alignment: Adjust the GoPro left or right until it is level. Important: Do not power on the gimbal before mounting the GoPro securely. Installation Process (Usage Instructions): Remove the shock-absorbing balls and open the top cover of the mounting plate. Mount the gimbal’s upper plate to the bottom of the DJI Phantom and secure it with screws. Reinstall the shock-absorbing balls. Attach your GoPro camera and secure it with straps. Usage Notes: Always mount the camera firmly before powering on to avoid shaking and damage to the control board. Keep the gimbal suspended before powering on; it will auto-level upon startup. Red LED indicates power, yellow LED flashes and stays lit when the gyroscope functions correctly. Control pitch and roll motors via the receiver or individual PWM channels.
