The 2" NPT Gateable Valve and Control Interface Kit (YE-VKG-PH) is an electric gateable valve kit for EF1 and Tornado series remote control monitors. The valve package includes a stainless steel valve with a controller mounted on a valve, and an interface box for connection of joystick control, monitor, and power. The valve kit electrical components shall be compatible with 12 or 24-volt direct current.The enclosure is weatherproof and utilizes weatherproof components such as a silicone seal, hardware with o-rings, and liquid-tight electrical connections with strain relief fittings.The enclosure includes the following: A preconnected 20-foot, four-conductor cable with a waterproof, four-pin connection plug for power and communications connection to the monitor A preconnected 20-foot, six-conductor cable with a waterproof, six-pin connection plug for connection to the valve controller A preconnected 15-foot, two-conductor cable with stripped ends for connection to vehicle power A four-pin receptacle with a cap for connection to a joystick control Joystick Controls are available here and here. An unused strain relief fitting for an additional operator station cable The valve has a 2" NPT female inlet and outlet, stainless steel ball and housing, valve position indicator, and six-conductor cable with waterproof plug for connection to enclosure valve control cable.This valve kit includes a heavy-duty 2” NPT water valve and an interface box for simplified 12/24 volt wire connections to the monitor control system. The valve is a 2” NPT full port stainless steel ball valve with integral electric actuator control with valve opening position sensing and cable with pre-wired plug.The valve kit is covered by a five-year written warranty from Task Force Tips.
