Why Should You Use 62mm Quick Release Buttons? The push-button latches are designed to simplify removing and refitting bumpers, providing an efficient and user-friendly solution. With our innovative quick-release pins, you can easily install and release them with a button, eliminating the hassle of using the OEM hardware. It's very common for lower cars to have to remove bumpers and side skirts before a jack can fit under the car. Why not speed this process up massively by mounting your body panels with our quick release buttons? These latches are designed to fit flush with your bumper and provide a secure hold, ensuring that your bumper stays in place even during the most intense driving conditions. Often, aftermarket bumpers won't line up with the original hardware as OEM bumpers would, and an excellent workaround for this is our quick release push buttons. Mounting the buttons yourself lets you get your bumpers lined up exactly as needed. With four colours to choose from, you can pick the one that best works with your vehicle or that blends in the most. We've supplied our quick release buttons with stainless steel hardware to avoid corrosion and potential failures. We've also anodised the buttons to ensure the longevity of the mechanisms while ensuring they will look great for years. Once the button has clicked into place, it is impossible to remove without pressing the button down first; this means you don't have to worry about your bumpers flying off at speed. If you're looking for a quick release system for your bumpers, then look no further than our Exoracing quick release buttons. Purchase Includes: 2 x 62mm Quick Release Button 4 x 19mm Nut M12 4 x 24mm Washers M12 2 x M10 Ball Headed Pin 2 x Long screws: length 30mm 2 x Medium screws: length 16mm 4 x Short screws: length 7.8mm Features: Stops bumpers from coming off while driving or cornering. Secure your bumpers quickly and easily. Complete with installation hardware. Drilling is required to fit the pin correctly to the bumper. High-grade anodised aluminium and stainless steel. Available in black, blue, red, and silver. 62mm button head. Exoracing Lifetime Warranty Quick Release Button Installation Guide: Installing quick release buttons is a straightforward process. However, here's a guide to ensure the best results possible. As always, if you are not comfortable with these processes or working with tools, we recommend a professional installation. Step one is deciding where you would like to mount your quick release button. Check that there is a surface to mount the ball-headed stud under the bumper you're working on. Mark where you will fit the stud, and check that this aligns with the bumper. You can now drill a 12mm hole into the mounting surface, and you are ready to install the stud. Thread a washer and nut onto the back of the stud, then another washer and nut on the top of the stud to clamp the mounting surface. Leave this finger tight for quick adjustment until you're happy with the fitment. Next, on the panel that will house the quick-release button, use a punch to mark the centre of where it will be located. Using a 38mm hole saw bit, drill the hole through the bumper or panel you want to fasten. Separate the threaded part from the back of the button, feed the button into the new hole from the top and then thread on the back part. Out of the small screws provided, thread the most suitable ones into the bottom of the button and tighten with the Allen key provided to stop the button from spinning in its location. Install the bumper or panel onto the car, push the quick-release button into the ball, and wait to hear and feel the click to ensure it's seated correctly. You can now make any final adjustments to the threaded stud to ensure the perfect fitment of your bumper. Now everything is aligned and adjusted correctly, tighten the 19mm nuts on the bar to secure the studs. You're now all done, and you can repeat this for as many Exoracing quick-release buttons as you've purchased! Remember to tag us in any photos on social media, as we'd love to see them! Technical Specifications: Button Head Material: Billet Aluminium Washer, Nuts and Ball Theaded Bar Material: Stainless Steel Button Head Sizes: 62mm Ball Headed Bar Length: 101mm M12 nut spanner size 19mm Available Colours: Black, Blue, Red, Silver Weight (Per button with hardware) 215g Warranty: Exoracing Lifetime Warranty Notes: Our Exoracing quick-release buttons are strictly for off-road and race use only. Drilling and modification are required to install our quick-release buttons. Professional installation is always recommended when trying to install Exoracing products.
