We test the remotes on keyless entry testers to ensure proper functioning before we send it to you. All vehicles that use this remote are onboard programmable. This means you are able to program the vehicle to accept new remotes yourself. The remote includes with a brand new battery. There is free tech support if needed. Remote For GMC Isuzu Oldsmobile: This factory keyless entry keyfob transmitter is for you to replace a lost, stolen, broken, or missing fob. The FCC ID of the remote is MYT3X6898B. GM's original part numbers for the remote were 15008008 (driver 1) and 15008009 (driver 2). GM discontinued those part numbers and replaced it with 15051014. This is a 3 button remote that transmits at 315 MHz. Note: The 1 and 2 on the back of the remotes is supposed to denote seat memory position. However, the order the remotes gets programmed determines the actual positions they work on. That is why when GM redesigned the remote, they did so without putting the 1 or 2 on the back of it. Programming Procedure: IMPORTANT: Before entering programming mode, have in possession all of the transmitters you will be using on the vehicle. Once you program the transmitter, all previous codes will be erased from the memory. The other transmitters will not be functional until you program the transmitters again. 1. Close all vehicle doors, windows closed, wait for dome light to go off.2. Insert the key into the ignition.3. Hold down the power UNLOCK button on the driver?? door panel-continue to hold down until instructed to release in step 9.4. Perform steps 5 through 8 in fairly rapid succession.5. Turn the ignition switch to the ON position (as far as you can go without starting the engine).6. Turn the ignition switch to the OFF position.7. Turn the ignition switch to the ON position.8. Turn the ignition switch to the OFF position.9. Release the power unlock button on the door panel. The vehicle will lock and unlock the doors automatically.10.Hold down the LOCK and UNLOCK buttons on the transmitter simultaneously until the door locks and unlocks. This step may take up to 30 seconds.11.Repeat step 10 for each additional transmitter (including any existing transmitters).12.Turn the ignition switch to the ON position in order to exit the transmitter programming mode. The following vehicles can use this remote when equipped with the factory keyless entry system: Oldsmobile Bravada (2002-2004), Buick Rainier (2004-2007), Chevrolet Trailblazer (2002-2009), Chevrolet Trailblazer EXT (2002-2006), GMC Envoy (2002-2007), GMC Envoy XL (2002-2006), Isuzu Ascender (2003-2008)
Related
Related
Related
Related