Flywheel Puller M26 x 1.50mm RH Thread External Description: Compatible with KTM ENDURO / OFFROAD / MX TWO-STROKE 125/250/300/360CC KTM MOTOPLAT. Cross reference numbers: MP12 WPS 62-2002 MX-12928 Fits most: Husaberg: 4 stroke 400cc, 501cc, and 600cc off-road models. Husqvarna: Late 2 stroke models with CDI ignitions. KTM: 125cc, 250cc, 300cc, 360cc, 495cc XC and MX 2 stroke. ATK Rotax models. Classic: Bultaco, Ossa, Montesa, KTM, Husqvarna, Sachs, Puch, Zundap, Cannondale 440 speed models. Compatible models: 1996-1999 Husaberg FC400 1994-2000 Husaberg FC501 1993-1996 Husaberg FC600 1998-2000 Husaberg FC600 1996-2000 Husaberg FE400 1996-2003 Husaberg FE400E 1989-2000 Husaberg FE501 1996-2003 Husaberg FE501E 1993-1996 Husaberg FE600 2000 Husaberg FE600 1996-2000 Husaberg FE600E 2003 Husaberg FS400E 1998-1999 Husaberg FS600E Tips on use: Ensure the flywheel thread is clean of dirt and not damaged before screwing the puller in. Use copper grease on the puller threads for long life. Make sure the puller is fully screwed into the flywheel. After tightening, use a hammer on the center and tap to jolt free (not always needed). If using old flywheel pullers, make sure the threads are in good condition before use to avoid damage to the flywheel.
