Short DescriptionEccentric Clamps 23271.0012.EH 23271The eccentric clamp allows clamping with pull-down effect on different workpiece forms at low height. Halder 23271.0012 Data Sheet*Please contact [email protected] for all lead times before placing your order. Once paid for, any cancellations will have a 4% cancellation fee.*Full DescriptionThe eccentric clamp allows clamping with pull-down effect on different workpiece forms at low height.MaterialCase-hardened steel, case-hardened and blue zinc-platedAssembly Manufacture a thread with the corresponding distance L2 / L3 to the workpiece. Screw in the eccentric clamp at the necessary height and set it relative to the workpiece with its flat side. Insert the workpiece and tighten the clamping pin using the internal hexagon. The proper tension is achieved after approx. 1/3 turn. The threaded hole must be lubricated on a regular basis.The rotational movement during tightening must always be completed towards the stops in order to prevent the workpiece from turning away from the stops.Halder 23271.0012 Data Sheet
