Short DescriptionFloating Clamps compact construction, combined clamping and locking M 12 23320.0008.EH 23320The floating clamp is used to clamp and support additional clamping points on components.The benefits of the floating clamp are:avoids vibration during the processingclamps ribs, beads and shackles to reinforce clamped componentsdistortion-free clamping of raw partscompact version with reduced height.Halder 23320.0008 Data Sheet*Please contact [email protected] for all lead times before placing your order. Once paid for, any cancellations will have a 4% cancellation fee.*Full DescriptionThe floating clamp is used to clamp and support additional clamping points on components.The benefits of the floating clamp are: avoids vibration during the processing clamps ribs, beads and shackles to reinforce clamped components distortion-free clamping of raw parts compact version with reduced height. MaterialAdjustable bodyAluminium, red anodisedBodyCase hardened steel, nitrided, manganese phosphate treated and groundClamping JawsCase hardened steel, nitrided, manganese phosphate treatedAssembly Mount the floating clamp (mounting holes for M 6, see drawing ) onto the device. Adjust the height limit stop and the rotating area with the sleeve and clamp with a set screw (4x WS 2.5). When setting the height limit, consider tolerance of workpiece. Operation Push the floating clamp downwards. Pivot the clamping jaws in as far as possible. The floating clamp contacts the bottom of the work piece with a slight spring load. Tighten the floating clamp with a hexagonal nut (WS 18) having a min. torque of 15 Nm and a maximum torque of 30 Nm. In the clamping process, the workpiece is clamped and simultaneously supported. Releasing is done in reverse order. NotesFor specific clamping situations, the standard clamping jaws supplied can be exchanged or replaced (see catalogue drawing: screw ISO4762-M8-12.9, Mmax.=43Nm).AccessoriesAs an accessory, we offer clamping jaws with an increased clamping range, refer to 23320.0050-.0058, as well as pivot jaws, refer to 23320.0148-.0156.Halder 23320.0008 Data Sheet
