Description 1/4" X 1/4" BSP Male Bushing is used to connect MTM foam cannons to a Karcher bayonet fitting (24.0459). Loctite should be used when installing this fitting. Using the bayonet (#24.0459) and steel fitting together, you can now adapt to the Karcher ‘K’ series to fit at the end of the spray gun extension. Easily install the fitting into the bayonet and then screw into the foam cannon inlet using 5-6 wraps of Teflon tape. Be sure that the bayonet is vertical, not horizontal once tightened down. NOTE: The above mentioned, bayonet adaptors (#24.0127 & #24.0459), do not fit the Karcher ‘X’ series. Specifications 1/4" Male BSP Inlet x 1/4" Male BSP Outlet Max - 4,000 PSI Material - Plated Steel PROP 65 WARNING This product can expose you to chemicals, including Lead which is known to the state of California to cause cancer or birth defects or other reproductive harm, go to www.p65Warnings.ca.gov for more information. The products we sell are not intended for use in potable water systems and are only for industrial non-drinking water applications.
