🔋 VanLiFe 24V 200Ah Stackable Lithium Battery LiFePO4 25.6V | 250A BMS | Stackable Steel Case | Australian Built The VanLiFe 24V 200Ah Stackable Lithium Battery is a high-capacity power solution designed for serious 24V off-grid, caravan, marine, commercial, and backup power systems. With 250A continuous charge and discharge capability, automotive-grade IEC 62619 certified cells, laser-welded bus bars, and a sealed powder-coated steel enclosure, this battery is built for demanding applications where reliability, safety, and performance matter. Designed and hand built in Australia, each battery is individually quality checked and tested twice before dispatch. ⚡ Key Features 🔋 200Ah 24V Lithium CapacityDelivers serious usable power for large 24V setups, including off-grid solar, inverters, appliances, tools, lighting, pumps, and mobile power systems. ⚡ Suitable for 5000W Inverter SystemsCapable of powering high-demand inverter setups when correctly installed with suitable cabling, fusing, and charging equipment. 🔌 250A Continuous DischargeBuilt for heavy-duty 24V loads and demanding power applications. 🔋 250A Continuous Charge CapabilitySupports fast charging from compatible lithium chargers, solar systems, and DC-DC charging setups. ⚖️ Active + Passive Cell BalancingHelps maintain cell health, improve charging efficiency, and support long-term battery reliability. 🔩 Laser-Welded Bus Bar ConnectionsStrong, reliable high-current connections directly to the cell pack. 🚫 Cable-Free Internal ConstructionReduces internal failure points while improving durability and reliability. 🛡️ Stackable Steel EnclosureSealed zinc-plated and powder-coated steel case with integrated mounting holes for secure installation and stacking. 📘 AS/NZS3001.2:2022 Installation-Focused DesignIncludes vent outlet plus high/low temperature, voltage, and over-current protection features required for modern installation standards. 🔥 Built for High-Demand Applications The VanLiFe 24V 200Ah Stackable Battery is ideal for running: ✔ Large inverters✔ Caravan power systems✔ Fridges and freezers✔ Induction cooking✔ Coffee machines✔ Pumps and lighting✔ Solar storage systems✔ Backup power systems✔ Off-grid touring setups✔ Mobile business power systems 🔒 BMS Protection Specifications Protection Feature Specification BMS Continuous Discharge 250A BMS Continuous Charge 250A Over-Current Protection 270A for 10 seconds Reset Time 35 seconds Low Voltage Shutdown 20V Low Voltage Restart 21V High Voltage Charge Disconnect 30V High Voltage Restart 29.6V 🌡️ Temperature Protection Protection Type Disconnect Reset Low Temp Charge 1°C 2°C Low Temp Discharge -20°C -15°C High Temp Charge 55°C 50°C High Temp Discharge 60°C 55°C 🔌 Charging Profile For best performance, use a compatible 24V lithium charger with the following settings: Bulk Charge: 28.4V – 29.2V Ideal Bulk Charge: 28.8V Absorption: 28.4V – 29.2V Ideal Absorption: 28.8V Float: 26.8V – 27.2V Ideal Float: 27.0V 🔄 Long Cycle Life The automotive-grade cells used in this battery are designed to withstand 3000 cycles at 80% depth of discharge under heavy electric vehicle use. That means daily cycling from full charge down to 20% state of charge would take approximately 8.2 years to reach 3000 cycles. In lighter applications such as caravan, RV, marine, and storage systems, service life may be even longer. 📊 Technical Specifications Specification Details Battery Chemistry LiFePO4 Lithium Nominal Voltage 25.6V System Suitability 24V systems Capacity 200Ah Approx Energy 5.12kWh BMS Continuous Discharge 250A BMS Continuous Charge 250A Terminal Size M10 Vent Outlet Thread 1/2 inch male BSP Cell Certification IEC 62619 Case Material Zinc-plated, powder-coated steel Internal Construction Cable-free Bus Bar Connection Laser-welded Weight 48kg Design Stackable with mounting holes Build Location Australia 📏 Dimensions Length: 438mm Width: 420mm Height: 153.4mm 🏕️ Ideal Applications 🚐 Caravans & motorhomes☀️ 24V off-grid solar systems⛵ Marine power systems🚚 Commercial vehicles🏕 Remote touring setups🔌 High-output inverter systems🏡 Backup and storage power systems⚙️ Industrial and mobile power applications ✅ Why Choose the VanLiFe 24V 200Ah Stackable? ✔ High-capacity 24V lithium power✔ Supports serious inverter systems up to 5000W✔ Powerful 250A continuous charge and discharge capability✔ Active and passive cell balancing✔ Automotive-grade IEC 62619 certified cells✔ Laser-welded bus bar construction✔ Cable-free internal design✔ Rugged sealed steel enclosure✔ Stackable design for expandable systems✔ Designed and hand built in Australia✔ Individually QC checked and tested twice✔ 7 + 3 year warranty with after-warranty repair service available 🛒 Build a Stronger 24V Power System Upgrade to the VanLiFe 24V 200Ah Stackable Lithium Battery and power your system with high-capacity, high-output lithium performance built for demanding off-grid and mobile applications.
