The SA-HPE25 extends your headphone reach by 25 feet without signal loss, perfect for studio engineers, DJs, and musicians who need freedom of movement while monitoring. Whether you're tracking in a large room or mixing from across the control room, this extension cable keeps your headphones connected to your audio interface or mixing console. This TRS extension cable maintains full stereo signal integrity across its 25-foot length, using 20-gauge wire construction that preserves audio quality from source to headphones. The 1/4" TRS male connector plugs into your audio equipment, while the female end accepts any standard 1/4" TRS headphone plug. The 20-gauge wire gauge provides the right balance of flexibility and signal preservation for professional headphone extension. At 25 feet, you get substantial range for studio work, live sound monitoring, or DJ booth setups where your mixing position is far from your audio source. The TRS configuration supports stereo headphones and maintains proper left/right channel separation. Use this in recording studios where talent needs to move freely during takes, live venues where monitor engineers work away from the main console, or DJ setups where your headphones need to reach from the booth to your mixing position. The cable works with any device that has a 1/4" headphone output and any headphones with a 1/4" TRS plug. Simply connect the male end to your audio source and plug your headphones into the female end. The cable comes ready to use with no additional adapters needed. Seismic Audio backs this extension cable with a one-year warranty and ships it fast to keep your audio workflow moving. Technical Specifications Spec Value Length 25 feet Male Connector 1/4" TRS Female Connector 1/4" TRS Wire Gauge 20 AWG Configuration Stereo extension cable Warranty One year Recommended For Studio monitoring, DJ headphone extension Frequently Asked Questions Will this cable work with my studio headphones? This extension cable works with any headphones that have a 1/4" TRS plug. Most professional studio headphones like Sony MDR-7506, Audio-Technica ATH-M50x, and Beyerdynamic DT 770 Pro use this standard connector. If your headphones have a 1/8" plug, you'll need a 1/8" to 1/4" adapter. How much signal loss should I expect at 25 feet? The 20-gauge wire construction minimizes signal loss across the 25-foot length. You may notice a slight volume reduction compared to plugging directly into your source, but the difference is minimal with most headphones. High-impedance headphones (250+ ohms) may show more noticeable volume drop than low-impedance models. Can I use this for live sound monitoring during performances? Yes, this extension cable works well for live sound applications where monitor engineers need to move around the venue while wearing headphones connected to the mixing console. The 25-foot length covers most small to medium venues, and the durable construction handles the movement and setup demands of live sound work. Will this work with my DJ controller's headphone output? This cable connects to any DJ controller, mixer, or audio interface with a 1/4" headphone output. Simply plug the male end into your controller's headphone jack and connect your headphones to the female end. This setup works particularly well when your DJ booth is positioned away from your mixing equipment. Can I chain multiple extension cables together for longer runs? While you can connect multiple SA-HPE25 cables together, each additional connection point introduces potential signal loss and possible connection issues. For runs longer than 25 feet, consider a single longer cable or a headphone amplifier positioned closer to your listening position to maintain optimal audio quality.
Related
Related
Related
Related