Kit includes timing and seal service tools for services on the 1.6L Ecoboost engine. Components included in kit: #2822 - Ford Cam Locking Plate - 1.5L & 1.6L Used when the VCT phasers have been removed from the front end of the camshafts Compare to Ford Factory Tool #303-1552 #5062 - Ford Flywheel Holder - 1.6L Used for holding the flywheel during timing and seal replacement Compare to Ford Factory Tool #303-393A, 303-393-01 & 303-393-02 #1806 - Ford Crankshaft Vibration Dampener Alignment Tool - 1.6L Used for aligning the Crankshaft Vibration Dampener Compare to Ford Factory Tool #303-1550 #1810 - Ford Fuel Line Disconnect Tool - 5/16" x 3/8" Both ends required due to limited clearance between fuel line connector and fuel rail Compare to Ford Factory Tool #310-250 Visit individual tool webpage for further product and application details Application Details Note: Applications are for 1.6L Ecoboost engines, but some components in this kit will also work on other Ford/Lincoln models with different power units such as: Expedition/Navigator, Explorer/Aviator, F-150/250/350/450/550 & Ford GT(super car) Make Model Year Ford Focus 2010-2018 Ford Fiesta 2014-2018 Ford Fiesta ST 2014-2018 Ford Fusion 2013-2020 Ford C-Max 2012-2017 Ford Transit Connect 2014-2017 Ford Escape 2013-2020 Volvo S60 2010+ Volvo V60 2014+ Volvo S80 2007-2016 Instructions Preparation: Ensure the vehicle is parked on a flat, stable surface and is safely lifted and supported. Disconnect the negative terminal of the battery to ensure safety during the service. Camshaft Phaser Removal: Remove any components obstructing access to the camshafts. Use #2822 (Cam Locking Plate) to secure the camshafts if VCT phasers are removed. Ensure proper alignment using Ford Factory Tool #303-1552 for reference. Flywheel Holding: Locate the flywheel and remove any necessary components for access. Utilize #5062 (Flywheel Holder) to immobilize the flywheel during timing and seal replacement. Verify proper fitment by comparing the tool to Ford Factory Tools #303-393A, 303-393-01 & 303-393-02. Crankshaft Vibration Dampener Alignment: Identify the crankshaft vibration dampener. Use #1806 (Crankshaft Vibration Dampener Alignment Tool) to ensure correct alignment. Confirm alignment using Ford Factory Tool #303-1550 as a guide. Fuel Line Disconnect: Identify the fuel line connector and fuel rail. Use #1810 (Fuel Line Disconnect Tool - 5/16" x 3/8") on both ends due to limited clearance. Ensure compatibility by comparing the tool to Ford Factory Tool #310-250. Timing and Seal Replacement: Follow the manufacturer's guidelines for timing and seal replacement procedures. Use the appropriate tools from the kit to carry out the replacement, ensuring precision. Reassembly: Follow the reverse order of disassembly to reassemble components. Torque all bolts and fasteners to the manufacturer's specifications. Kit Applications and Compatibility: Refer to the individual tool webpages for detailed product and application information. Confirm the compatibility of each tool in the kit with your specific 1.6L EcoBoost engine. Post-Service Checks: Reconnect the negative terminal of the battery. Start the engine and check for any unusual noises or vibrations. Clear any fault codes and perform a test drive to ensure proper functionality. Documentation: Keep a record of the service, including the date, mileage, and tasks performed. Store the tools in a secure and organized manner for future use. These instructions are intended as a general guide. Always refer to the specific service manual for your vehicle, follow safety procedures, and use the provided tools according to their instructions and specifications.
