The UM7 orientation sensor from Redshift Labs is an Attitude and Heading Reference System (AHRS) that contains a three-axis accelerometer, rate gyro, and magnetometer. It combines this data using an Extended Kalman Filter to produce attitude and heading estimates. Overview The UM7 orientation sensor is a third-generation Attitude and Heading Reference System (AHRS) from Redshift Labs that produces attitude and heading estimates from triaxial accelerometer, rate gyro, and magnetometer data. Unlike a typical inertial measurement unit (IMU), which only provides raw sensor readings, the UM7 features an onboard microcontroller that combines sensor data using a sophisticated Extended Kalman Filter (EKF) to generate orientation estimates 500 times a second. Two versions of the UM7 are available: the UM7 orientation sensor, which includes an enclosure, and the UM7-LT, which does not. The two versions are functionally equivalent, and both include a cable. UM7 orientation sensor. UM7-LT orientation sensor. The UM7 features a number of improvements over its predecessor, the UM6, including higher gyro bias stability and lower noise, a new communication architecture for improved flexibility, optional NMEA packet transmission, UTC time-synchronization with external GPS, and support for third-order temperature compensation on all sensors. It takes advantage of newer MEMS (micro-electro-mechanical systems) technology that allows it to offer better performance at a lower price. Connections for power and TTL serial communication can be made to the UM7 through a polarized five-pin male connector on one side, which mates with an included cable assembly. A pair of six-pin expansion headers on the other side of the board provide additional connectivity options, including an alternative SPI interface and a secondary serial interface that can be connected to an external GPS module (like our LS20031 GPS receiver). Additional cable assemblies for the expansion headers are not included. You can use a general-purpose USB-to-TTL-serial adapter, such as our CP2104 carrier or USB AVR programmer, to connect the UM7 to your computer. You can then use the Redshift Serial Interface (available in the “Resources” tab) to configure the sensor, and view and log data in real-time. Details for item #2764 Updated UM7 enclosure: In September 2021, the UM7 enclosure design changed to lose the tabs with the mounting holes and move the mounting holes to the bottom of the case as show in this file (15k dwg). As of February 2022, UM7 units ship with a removable bracket plate that adds mounting holes in the same locations as the original enclosure design. UM7 orientation sensor. UM7 orientation sensor with bracket plate removed. UM7 orientation sensor (with original enclosure). Product #2764 is the UM7 orientation sensor with an enclosure. The bottom side of the enclosure features five threaded mounting holes for M1.4 screws (not included). We recommend screwing no more than 3 mm (0.12″) into the mounting holes. UM7 orientation sensor with included cable and U.S. quarter for size reference. UM7 orientation sensor, bottom view showing option expansion headers and mounting holes. UM7 orientation sensor with bracket plate removed, bottom view showing option expansion headers and mounting holes. Product Comparison We carry several inertial measurement and orientation sensors. The table below compares their capabilities: Product Name Sensors Estimation Other Gyros (3x) Accels (3x) Mag (3x) Altitude Roll Pitch Yaw Quaternion Enclosure Pololu MinIMU-9 v6 Pololu AltIMU-10 v6 Redshift Labs UM7-LT Orientation Sensor Redshift Labs UM7 Orientation Sensor Features Sensors and processing Excellent gyro bias stability over temperature Adjustable low-pass filter and EKF settings provide customizable performance for various applications States and sensor data synchronized to GPS position and velocity using optional external GPS module Allows for alignment calibration and third-order bias and scale factor temperature compensation for accelerometers, gyros, and magnetometer Magnetometer soft and hard-iron calibration can be performed through the serial interface software Communication Redshift Serial Interface. Graph of gyro readings displayed by the Redshift Serial Interface connected to a UM7 orientation sensor. Output data: Attitude and heading (Euler angles) Attitude quaternion magnetometer, accelerometer, gyro data GPS altitude, position, velocity (with optional external GPS) 3.3 V TTL serial interface (UART) with baud rates up to 921,600 bps can stream data or provide updates on request Note: the main UART pins, TX, and RX, are 5V-tolerant and can be directly connected to 5 V systems that are guaranteed to read 3.3 V as high Transmits data using human-readable NMEA strings (up to 100 Hz broadcast), binary packets for higher efficiency (up to 255 Hz broadcast), or a combination of both Flexible communication architecture allows UM7 to transmit any combination of data at individually adjustable rates Connects to the Redshift Serial Interface software to allow for real-time plotting of sensor data, logging, device configuration, and magnetometer calibration SPI interface available through expansion connector Specifications UM7-LT (no enclosure): Dimensions: 1.06″ × 1.02″ × 0.26″ (27 mm × 26 mm × 6.5 mm) Weight: 0.12 oz (3.5 g) without cable UM7 (with enclosure): Dimensions: 1.09″ × 1.12″ × 0.37″ (28 mm × 28 × 9 mm) without mounting tabs Weight: 0.26 oz (7.5 g) without cable Operating voltage: 4 V to 5.5 V I/O logic level: 3.3 V (with 5V-tolerant main UART pins, TX and RX) Attitude and heading EKF estimation rate: 500 Hz ±1° typical static pitch/roll accuracy ±3° typical dynamic pitch/roll accuracy ±3° typical static yaw accuracy ±5° typical dynamic yaw accuracy 0.5° angle repeatability
