ANDREWS PRODUCTS LTD291130 AndrewsEV3 Hydraulic Camshaft w/Gear - 291130 for Select Harley-DavidsonAndrews EV3 Hydraulic Camshaft w/Gear Time tested and track proven Andrew's cams have computer enhanced design features that provide a superior combination of performance gains and reliability without sacrificing component longevity Installation instructions included Timing and Duration measured at .053" cam lift Listed for Reference: 1984/1987/Later OE cam is 212° intake, 202° exhaust, .472" lift on both valves. Timing 03/39, 54/02. Valve Lift .495", .495". Duration 222, 236. Grind OEM (L) 1988/1991 Listed for Reference: 1992/Later OE cam very close to 1984/1987 specs. California cams are approximately 178° duration. Fuel injected "0" cam is 200° duration intake and 216° duration exhaust. Timing 02/30, 31/09. Valve Lift .472", .472". Duration 208, 202. Grind OEM (N) 1992/Later Bolt-in cam for light bikes (FXRS, etc). More mid range power. Idle smoothness unaffected. This is a 6000+RPM cam for stock heads and springs with hydraulic lifters. USE STOCK SPRINGS. Timing 21/37, 43/15. Valve Lift .495" .495". Duration 238 238. Grind EV3. By: ANDREWS PRODUCTS INCPart Number : 291130 291130 AndrewsEV3 Hydraulic Camshaft w/Gear - 291130 for Select Harley-DavidsonAndrews EV3 Hydraulic Camshaft w/Gear Time tested and track proven Andrew's cams have computer enhanced design features that provide a superior combination of performance gains and reliability without sacrificing component longevity Installation instructions included Timing and Duration measured at .053" cam lift Listed for Reference: 1984/1987/Later OE cam is 212° intake, 202° exhaust, .472" lift on both valves. Timing 03/39, 54/02. Valve Lift .495", .495". Duration 222, 236. Grind OEM (L) 1988/1991 Listed for Reference: 1992/Later OE cam very close to 1984/1987 specs. California cams are approximately 178° duration. Fuel injected "0" cam is 200° duration intake and 216° duration exhaust. Timing 02/30, 31/09. Valve Lift .472", .472". Duration 208, 202. Grind OEM (N) 1992/Later Bolt-in cam for light bikes (FXRS, etc). More mid range power. Idle smoothness unaffected. This is a 6000+RPM cam for stock heads and springs with hydraulic lifters. USE STOCK SPRINGS. Timing 21/37, 43/15. Valve Lift .495" .495". Duration 238 238. Grind EV3. By: ANDREWS PRODUCTS INC **** PLEASE NOTE ***** : 291130 These are performance and custom aftermarket products sourced to match or exceed original specifications as an alternative to the OEM version. Any Harley-Davidson part numbers referenced are for identification purposes only.
