Features: Compact size and weight attributable to advance PWM technology Built-in PFC, provide input power factor over 0.98 (full load) AC+DC output mode for voltage DC offset simulation Programmable slew rate setting for changing voltage and frequency Programmable voltage, current limit One-key recall for nine different voltages and frequencies Low output impedance for testing IEC 61000-3-2 (31040) Comprehensive measurement capability, V, lrms, lpk, Inrush, P, Q, S, PF, CF of current and etc. High output current crest factor, ideal for inrush current testing Turn on, turn off phase angle control TTL signal which indicates ON/OFF Three units combined to three-phasepower output Easy-use software for operation Specifications: Power/Phase Output Phase: 1 Output Rating-AC: 500VA Voltage Range/Phase: 150V/300V/Auto Accuracy: 0.2%+0.2%F.S. Max Current/Phase R.m.s: 4A/2A (150V/300V) Peak: 24A/12A (150V/300V) Frequency Range: DC,15-1KHz Accuracy: 0.15% Output Rating-DC Power: 250W Voltage: 212V/424V Current (per phase): 2A/1A (212V/424V) Input Rating Voltage Range: 90-250V, 1ø Frequency Range: 47-63Hz Current (per phase): 10A Max. @ 90V Power Factor *3: 0.97 Min. The 31005A is a Programmable 300 V, 2 A, 500VA, 1 kHz, single Phase AC Power Source from QuadTech. The AC+DC modes extend the applications not only pure AC voltage, but for a DC component as well, for testing DC offset in the laboratory. Users can also use an optional DC noise filter to get low noise and good stability DC voltage for testing. Applying the advanced DSP technology, the 31000 series is able to provide precision and high-speed measurements such as RMS voltage, RMS current, true power, frequency, power factor and current crest factor.
