REMOVE PROPSPEED & SIMILAR FOUL-RELEASE COATINGS HASSLE FREE!AVOID THE GRIND, USE STRIPSPEEDDeveloped to help Propspeed applicators prepare metal surfaces for reapplication, Stripspeed removes foul-release coatings in 30* minutes or less. The thick consistency easily hangs on vertical and overhead surfaces, making it easy to use and there is no mixing required. Just shake, pour and go. Stripspeed is non-flammable, non-caustic, DCM and NMP free. Unlike grinding or using abrasives, Stripspeed doesn't cause mechanical wear through multiple refits, and doesn't create toxic dusts or debris, increasing the lifetime of the metal.Save time and money on Propspeed applications with STRIPSPEED!*Timing is subject to atmospheric conditions. Ideal temperature is 15-27°C (60-80°F)SUITABLE FOR USE ON: All metal surfaces where Propspeed, or similar running gear coatings, have been applied.EASY TO USEEasy to apply, easy to remove. Scrape and then scrub with an abrasive pad.STRIPS SWIFTLYStripspeed works within 30 minutes or less, speeding up the Propspeed removal process.APPLY AT ANY ANGLEStripspeed's unique formula can be applied at any angle without sliding off.NO AIRBORNE PARTICLESWith no grinding required, there will be no airborne particles, making Propspeed removal harmless.HOW MUCH DO I NEED?1 x Propspeed Large Kit = 2L Stripspeed1 x Propspeed Medium Kit = 1L Stripseed1 x Propspeed Small Kit = 0.5L StripspeedDO NOT USE ON:• Transducers• Underwater lights• Hull• Foulfree• Lightspeed• Powder coat
