334th Sticker 3.33" x 3.98" sticker can be adhered to most surfaces! I do not make these in house! I order these from a vendor and there is longer than normal processing time. Please allow 14 days business days for them to arrive to me before being delivered to you. How to place your sticker: 1. Prep Your Surface and Pre-Squeegee sticker Prepping the Area - When necessary, clean the surface of your item before applying the sticker using mild soap and water. Allow to dry completely prior to placement of your sticker. Pre-Squeegee: place the design face down with the white side facing up. Using the side of a plastic card (credit card, store card, etc.) run over the whole design with hard pressure, back and forth 2-4 times. Additional pressure and repetitions should be applied on thin and separated design elements, such as small text. 2. Preparing your sticker for Transfer Gently peel the two sheets apart, watching to ensure the whole design lifts off onto the top carrier sheet. Don’t peel with your hands, peel with your EYES. Designs which contain thin lines and small separated elements, such as small text, the slower you should peel. If parts don't lift, re-squeegee from behind, and attempt to peel again from a different angle. You’ll get a feel for it with experience. 3. Placing Your Sticker Onto Your Item First, identify the placement area on your item. For smaller designs (4 inches & under), carefully place the design onto the placement area with two hands controlling the placement. 4. Completing the Transfer Process After placing the design, firmly squeegee it 2-4 times. Peel slowly, watching to ensure all elements stick. Again - use your EYES and not just your hands. If any part of the design is not adhering, lay the carrier sheet back down, re-squeegee and try peeling from a different angle.
