【Application & Use】 Designed to keep the tile balance on the same horizontal position; great for preventing tiles from moving while curing 【High Quality & Resistant】 Made from semi-crystalline thermoplastic with high impact resistance, and the steel part is made from stainless steel with a thickness of 1.4 mm, allowing you to use them with 1.5 mm up to 2.5 mm plastic spacers 【Reusable & Durable】 Save a lot of money by using them again and again; after the tiles are set, simply twist the screws anticlockwise and remove the main anchor, you may need to hammer it gently 【Simple & Easy to Use】 Unlike the normal leveling wedges and pliers, this new system doesn't require any tools unless you need to tighten very hard, and the special wrench is included. It is easy enough to fix or remove with the wrench to improve tile installation speed 【Suitability】 Suitable for 3 mm to 16 mm thickness of the tile, but can be used with tiles up to 18 mm thickness Specifications: Material: PP + Stainless steel Color: Black + Orange Suitable spacer: 2~6 mm Suitable for tile thickness: 3~16 mm Quantity: ~100 pcs Package Includes: 100 x Tile positioning levelers (Approx.) 1 x Wrench Instructions: 1.When laying and pasting tiles, the brick seam shall be kept at 2-6 mm 2. Set the thickness of the tile that the regulator will be inserted into, insert T-type metal needles along the brick joints, then rotate 180° to lock it in the bottom of the two bricks 3. Squeeze the adjusting cover downward by hand or with the special wrench to make the level of the two bricks consistent 4. After the construction, five hours later, when cement or tile adhesive is not completely dry, you can loosen adjusting cap to the opposite direction, 180° rotate again, let the T needle along the crack out 5. Before tightening, it is recommended to rotate the T-pin left and right several times to make room for the surrounding cement or tile glue so that the regulator can be more easily removed
Related
Related
Related
Related