3M Aura? Healthcare N95 Particulate Respirator 9205+ | Ultra-Lightweight Three-Panel Flat-Fold Design | NIOSH Approved | MFG# 7100232219 | Box of 20 Units 3M Aura? Particulate Respirator 9205+, N95 - High Performance Flat-Fold Respirator Overview The 3M Aura? 9205+ is an ultra-lightweight, flat-fold N95 respirator engineered to deliver at least 95 percent filtration of non-oil particulates at an airflow rate of 85 L/minIts patented three-panel design folds down to just 5 mm for compact storage, then springs open to conform to a wide range of facial shapesThe sculpted nose panel provides extra clearance for eyewear and, together with embossed top panels, directs exhaled air away from lenses to reduce foggingEach box contains 20 units. Key Features Three-panel flat-fold design Collapses to 5 mm for storage and springs open for a secure seal. Sculpted nose panel Provides 12 mm of eyewear clearance and features a smooth inner liner for comfort. Embossed top panel Deflects exhalation upward, reducing lens fog by up to 65 percent. Innovative chin tab Enables 15 percent faster donning and yields 20 percent fewer fit errors in trials. Soft polyurethane foam Conforms to nasal pressure points for comfort during extended wear of eight hours or more. Dual braided headbands Made of non-latex polyisoprene and staple-attached to maintain consistent tension. Adjustable aluminum nose clip Molds to any bridge shape and locks in place for a leak-free seal. Advanced electrostatic filter media Multi-layer polypropylene captures at least 95 percent of 0.3 ?m particles at inhalation resistance ? 343 Pa. Key Specifications Part Number: 9205+ 3M ID / SAP ID: 7100232219 Legacy SKU: 70071734837 Local Catalog ID: 9205+ Packaging: Box of 20 units Unit Weight: Approximately 9.92 g Folded Dimensions: Approximately 123 ? 95 mm Shelf Life: 5 years (storage from ?20 ?C to +50 ?C up to 80 percent relative humidity) Inhalation Resistance: ? 343 Pa at 85 L/min Exhalation Resistance: ? 245 Pa at 85 L/min Materials & Construction Outer and inner layers: Spunbond polypropylene Core filter: Electrostatically charged meltblown polypropylene Headbands: Braided polyisoprene (non-latex) Nose foam: Polyurethane Clip and staples: Aluminum and steel Filtration Performance & Testing NIOSH 42 CFR 84 certified with less than 5 percent penetration at 0.3 ?m, 85 L/min airflow Maintains at least 95 percent efficiency through 200 mg salt aerosol loading Proprietary media offers a balance of low breathing resistance and high particle capture Fit Testing & Usage Wash or sanitize hands thoroughlyCup the respirator under your chin with the nose clip positioned upward. Pull the braided headbands over your head, placing the upper band at the crown and the lower band below the ears. Mold the aluminum nose clip evenly around the bridge of your nose using both hands. Perform a positive seal check by exhaling sharply and feeling for air leaks around the sealThen perform a negative seal check by inhaling sharply the mask should collapse slightly if sealed correctly. Regulatory & Certifications NIOSH-approved N95 (TC-84A-7526) Compliant with OSHA 1910.134 (requires training, fit testing, and medical evaluation) Meets CSA Z94.4 requirements for selection, use, and care in Canada Equivalent to EN 149:2001 + A1:2009 FFP2 when tested to European standards REACH and RoHS compliant latex-free Environmental & End-of-Life Dispose of as contaminated personal protective equipment in accordance with local regulations In some regions, components made of polypropylene may be eligible for 3M?s recycling program No flame-retardant or chemical finishes have been applied, minimizing environmental impact Support
Related
Related
Related
Related