This 3M™ Texturing & Satin Finishing Kit has the best of both worlds: a combination of 3M™ Radial Bristle Brushes and 3M™ Scotch-Brite Surface Conditioning Wheels (A.K.A The Scrubby Wheels). This helps you quickly clean up oxidized metals, sand down (clean up) tarnish, remove paint or varnish on wood or provide a superb satin finish or brushed texture to almost any metal. (Can also be used to sand some plastic).Includes 3 inch diameter wheels of the following: 1x 80 Grit 3M™ Radial Bristle Brush (Yellow color)1x 120 Grit 3M™ Radial Bristle Brush (White color)1x 220 Grit 3M™ Radial Bristle Brush (Maroon Color)1x Medium 3M™ "Scrubby" Scotch-Brite Surface Conditioning Wheel1x Fine 3M™ "Scrubby" Scotch-Brite Surface Conditioning Wheel1x Very Fine 3M™ "Scrubby" Scotch-Brite Surface Conditioning Wheel QUICK FACTS 3M SCRUBBY WHEELSThe 3M™ Scrubby Wheels are great for sanding and texturing metals. They also work well for removing paint, stain and other coatings from most surfaces. They leave varying degrees brushed finishes; coarse, medium and fine; Perfect for that modern, distressed look. 3M RADIAL BRUSHESThe 3M™ Radial Bristle Brushes require minimal pressure and easily conform to tight areas, crevices and contoured parts. Minerals embedded in their flexible thermoplastic composition replace the need for any messy rouge or compound. Use dry, no water needed! APPLICATIONSJewelry applications*: Excellent for cleaning medium to large size metal castings. Also great for adding a brushed texture to belt buckles, large pendants, silverware, etc. Automotive and Woodworking applications*: Ideal for sanding and removing paint, stain and coatings. Cleans up automotive trim, brightwork, paint, engine components and oxidized surfaces. Leaves a coarse brushed texture. Can also be used to sand turned wood pieces, bowls, carvings and more. Use thiese abrasives during the rougher stages of wood finishing and prep work. Other fun applications*: Clean old golf clubs and drivers! Can also be used to add a texture to door handles.All wheels come pre-mounted with a Center Hub for use on the JOOLTOOL Spindle or the "Brush Adapter" (sold separately) for freehand use with our Pro-Flexshaft Kit (pictured below). * Not recommended for carbide (high-carbon) metals, lapidary or glass.
