3 Remote Control Mains Plugs/Sockets - 240VacOverview Use this product to turn off/on any/all appliances with one easy action thus saving you time and more importantly, money. Leaving a device on standby can still consume up to 70% of full power and can also shorten its life by up to 15%. The plugs/sockets do not have to be on display to be switched off, if you have plugs/sockets in a cupboard or some other not so easy to reach place, our remote control will still work and automatically switch them off.What's included?3 x Remote Control Mains Plugs/Sockets - 100mm(l) x 55mm(w) x 47m(d)1 x Remote Control- 100mm(l) x 35mm(w) x 15mm(d)1 x Battery for Remote Control (12V A23)1 x Instruction BookletFeatures?1) 30m wireless range, line of sight is not required2) There is an on/off switch (yellow button) on each plug/socket for if you cannot find the remote control and need to switch them off manually.3) The single remote control can operate an unlimited number of sockets (within reason). Information about programming below. 4) All sockets are rated at 10A, this is usually more than ample for most electronic devices. Memory/Programming Multiple SocketsThere are 3 channels on the remote control, the product is factory set with one wireless socket assigned per channel. However, each socket can use 2 frequencies, (meaning that each socket can be assigned to either one or two channels on the same remote control). To assign a socket to a channel, hold down the yellow button on the side of the socket for 5 seconds and press any button (on or off) on the remote control channel you want it to become assigned to. If, after having assigned a socket to 1 or 2 channels you wish to change the channel it is assigned to, do the following: 1. hold the yellow button for 5 seconds2. press channel you want to assign it toRepeat this process to assign the socket to another channel As many sockets as required can be put on to each channel on the remote control so more than one set of these products can be purchased and used together. i.e. the following configuration could be set up if required; Channel One - 3 Sockets, Channel Two - 5 Sockets, Channel Three - 1 Socket. Perfect for large offices, warehouses, etc. How to use?Simply plug the sockets into wall outlets and plug what was originally in the wall outlets into the plugs/sockets. A gang extension lead could be used in conjunction with one of the plus/sockets however you must be careful not to overload (10A rating, 2400W).Transmission Frequency - 433.92MHzStandards - CE and RoHs.
Related
Related
Related
Related