Waveform’s line of 4.3-10 Tappers provides precise, non-directional signal tapping for 600 MHz to 4 GHz frequency bands, ensuring low PIM, low insertion loss, and minimal reflection. Their non-directional design simplifies deployment, reducing room for error and allowing for more flexible installations in Distributed Antenna Systems (DAS). These tappers are compatible with 4G LTE, and 5G NR low- and mid-band networks. Each tapper features 4.3-10-Female connectors, supports up to 300W of power, and is built with a robust aluminum housing, brass center conductor, and PTFE dielectric for durability and consistent performance. Models and Coupling Ratios 3:1 | 4.8 dB: 6.1 dB tapped port loss, 1.8 dB through port loss 4:1 | 6.0 dB: 7 dB tapped port loss, 1.6 dB through port loss 6:1 | 8.0 dB: 8.5 dB tapped port loss, 1.1 dB through port loss 10:1 | 10 dB: 10.5 dB tapped port loss, 0.9 dB through port loss 20:1 | 13 dB: 13 dB tapped port loss, 0.7 dB through port loss 30:1 | 15 dB: 15.3 dB tapped port loss, 0.5 dB through port loss 100:1 | 20 dB: 20.1 dB tapped port loss, 0.4 dB through port loss Specifications Connector Type: 4.3-10-Female Frequency Range: 600–4000 MHz Impedance: 50 Ohm VSWR: ≤ 1.3 Low PIM: ≤ -160 dBc @ +43 dBm x2 Power Handling: 300W (Average), 3kW (Peak) More specifications available in the spec sheet below Waveform’s 4.3-10 Tappers are a dependable solution for distributing RF signals in high-performance networks, offering models tailored to a variety of signal distribution requirements. Their non-directional design makes installation straightforward and error-free, even in complex systems.
