Dive Deeper with Your Insta360 X3 — Down to 40 Meters (131 Feet) The POWRIG Waterproof Dive Case for Insta360 X3 (Model WP-ONEX3) is a purpose-built underwater housing that protects your Insta360 X3 camera at depths of up to 40 meters (131 feet) — 10 meters deeper than standard 30m housings. Whether you're exploring a coral reef, filming a surf session from below, or capturing immersive 360° footage of a wreck dive, this case keeps your X3 safe, dry, and shooting in full panoramic quality. The transparent housing is precision-molded to fit the Insta360 X3 body exactly, with optical-grade clear covers over both lenses to maintain image clarity and seamless 360° stitching in post-production. A built-in 1/4"-20 threaded screw mount on the base lets you attach the case directly to any standard tripod, underwater tray, selfie stick, or extension pole. Who Is This Dive Case For? Scuba Divers — 40m depth rating exceeds recreational dive limits (typically 30-40m), giving you extra safety margin Snorkelers & Freedivers — Lightweight and compact for easy handling at the surface or during breath-hold dives Surfers & Water Sports Enthusiasts — Protect your X3 from impact, salt water, and sand while filming waves, kayaking, or white-water rafting Underwater Photographers & Videographers — Professional-grade housing for commercial shoots, pool photography, and real estate pool tours Adventure Travelers — Reliable waterproof protection for any wet or dusty environment: waterfalls, rivers, rain, mud, and desert sand Key Features 40m / 131ft Waterproof Depth — Rated 10 meters deeper than standard 30m cases, providing an extra safety margin for deeper recreational dives. Full 360° Lens Coverage — Optical-grade transparent dome covers over both lenses preserve image quality and allow seamless 360° stitching in Insta360 Studio or the Insta360 app. Custom Fit for Insta360 X3 — Precision-molded housing that fits the X3 body exactly, with access to all buttons. 1/4"-20 Screw Mount — Standard thread on the base for direct attachment to tripods, underwater trays, invisible selfie sticks, and extension poles. No adapter needed. Durable O-Ring Seal — Reliable waterproofing under pressure. Easy to inspect and maintain. Compact & Travel-Friendly — Minimal added bulk. Slides easily into your dive bag or carry-on luggage. 40m vs. 30m — Why the Extra Depth Matters Feature Standard 30m Case POWRIG 40m Case (WP-ONEX3) Max Depth 30m / 100ft 40m / 131ft Safety Margin at 30m None (at rating limit) 10m buffer Recreational Diving (≤40m) Partial coverage Full coverage Advanced Open Water Dives Not recommended Suitable Pressure Resistance ~4 ATM ~5 ATM Technical Specifications Model WP-ONEX3 Compatible Camera Insta360 X3 (not compatible with ONE X, ONE X2, X4, or GO series) Waterproof Depth 40 meters / 131 feet Mount 1/4"-20 threaded screw (standard tripod thread) Lens Cover Optical-grade transparent dome (both lenses) Seal Type O-ring seal Use Cases Scuba diving, snorkeling, surfing, freediving, kayaking, pool photography, water sports How to Use the Dive Case Pre-Dive Check: Before each use, inspect the O-ring for debris, hair, or damage. Apply a thin layer of silicone grease if needed. Ensure the O-ring is seated correctly in its groove. Insert Camera: Open the housing, place your Insta360 X3 inside, and align both lenses with the transparent dome covers. Set your desired shooting mode and start recording before sealing. Seal the Case: Close the housing and secure the latch/clasp firmly. Verify all edges are fully sealed with no gaps. Water Test (Recommended for First Use): Submerge the sealed empty case in a pool or bucket for 10-15 minutes. Check for leaks before your first dive with the camera inside. Mount and Dive: Attach the case to your selfie stick, underwater tray, or tripod using the 1/4"-20 screw mount. Start your dive and capture immersive 360° underwater footage. Post-Dive Care: Rinse the case thoroughly with fresh water after each saltwater use. Open, dry the O-ring and housing interior, and store in a cool, dry place. Compatibility Note — Important This dive case is designed exclusively for the Insta360 X3. It will not fit: Insta360 ONE X (1st generation) — different body shape Insta360 ONE X2 — smaller body, use the WP-ONEX2 case instead Insta360 X4 — larger body, requires X4-specific housing Insta360 GO / GO 2 / GO 3 — completely different form factor Not sure which Insta360 model you have? Check the label on the bottom of your camera or in the Insta360 app. Contact us at [email protected] if you need help identifying the right dive case. What's in the Box 1x POWRIG 40m Waterproof Dive Case for Insta360 X3 Note: Insta360 X3 camera is not included. Warranty & Support All POWRIG products come with a 1-year limited warranty covering manufacturing defects. Questions about compatibility or maintenance? Email [email protected]. Frequently Asked Questions Is this dive case compatible with the Insta360 X4 or ONE X2? No. This case (WP-ONEX3) is designed exclusively for the Insta360 X3. The X4 has a larger body and the ONE X2 has a smaller body — each requires its own specific housing. What's the difference between this 40m case and a standard 30m case? This case is rated to 40 meters (131 feet), which is 10 meters deeper than standard 30m housings. This extra depth rating provides a safety margin when diving near the 30m recreational limit, and covers Advanced Open Water dive depths up to 40m. Will 360° stitching work underwater with this case? Yes. The optical-grade transparent dome covers maintain clear visibility for both lenses, allowing Insta360's stitching algorithm to produce seamless 360° panoramas in the Insta360 app or Insta360 Studio. Minor refraction at extreme angles is normal for all underwater housings. Can I use the touchscreen through the housing? No. The touchscreen is not accessible through the waterproof housing. Start recording and set your desired mode before sealing the case. The X3's buttons allow basic operation (start/stop recording) through the housing. How do I prevent fogging inside the case? Place a small anti-fog insert or silica gel packet inside the housing before sealing. Avoid opening and closing the case in humid environments. If fogging occurs, dry both the camera and housing interior before re-sealing. Does this case float or sink? The case with the X3 inside will sink. For flotation, attach a floating hand grip or buoyancy arm to the 1/4"-20 screw mount on the base. How do I maintain the O-ring? After each use, rinse with fresh water. Periodically remove the O-ring, clean it, inspect for nicks or debris, and apply a thin layer of silicone grease before reinstalling. Replace the O-ring if damaged or if the case fails a water test. Can I use this case for activities other than diving? Absolutely. This case is ideal for any wet or dusty environment: snorkeling, surfing, kayaking, white-water rafting, pool photography, dusty off-road adventures, and more.
Related
Related
Related
Related