[short] 400-3 TPU Type SHD-GC Portable Power Mining Industrial Cable 8000v Allowable Ampacity For 400-3 TPU Type SHD-GC Portable Power Mining Industrial Cable 8000v: 435 Amps Applications: HW260 Type P Drilling Rig Marine Cable 600V is designed and constructed for the demanding environments of offshore drilling and petroleum facilities, and mining sites. Also Known As: 400-3 HW260 600V Single Conductor Power Cable, 400-3 HW260 600V Oil & Marine Rig Cable, 400-3 HW260, HW260 Unarmored Power Cable, 400-3 HW260 Type P Cable. Standards: NVE 95/1696, FAL Transport Canada Det Norske Veritas (DNV) Lloyd's Register of Shipping (LRS) American Bureau of Shipping UL listed as Marine Shipboard Cable United States Coast Guard CSA listed as Marine Shipboard Cable Dual certified IEEE 1580 Type P and UL 1309/CSA C22.2 No. 245 Type X110. Highest ampacity ratings: ABS 100°C, DNV 95°C, LRS 95°C, Transport Canada 95°C Severe cold durability: exceeds CSA cold bend/cold impact (-40/-35° C) Flame retardant: 60332-3 Category A and IEEE 1202 Construction: Conductor: Soft annealed flexible stranded tinned copper per IEEE 1580 Table 11. Insulation: Flame Retardant Cross-linked Polyolefin, Meets all requirements of IEEE 1580 Type P and UL 1309/CSA C22.2 No. 245 Type X110. 2000V/IEC 1000V. Specification: AWG Size: 400-3 Strands: 259 Approx. Diameter INCHES:3.260 New Weight lb/1000FT: 7945 lbs [/short] EPDM Insulation. Copper Braid Shield4 AWG - 400 kcmil. 8000 Volts90°C - - 50°C Applications: TPU Type SHD-GC Portable Power Cable is designed for use as heavy-duty trailing cable on mining equipment where maximum safety is required. Also suitable for high voltage distribution in underground mines where portable power is necessary. Construction: TPU Type SHD-GC Portable Power Cable conductors are flexible, rope stranded, uncoated annealed copper conforming to ICEA S-75-381 Paragraph 3.11 and ASTM B-3/B 173. A semi-conducting tape is applied over the conductor with a 10% minimum overlap. The tape shall meet the requirements of ICEA S-75-381 Paragraph 3.14. The separator is a 10 mil nominal thickness semi-conducting tape colored black, white and red is helically applied over the insulation with a 50% nominal overlap. The tape shall meet the requirements of ICEA S-75-381 Paragraph 3.17. The shield is tinned coated copper braid with an 85% minimum coverage and is applied over the taped and insulated conductor. It shall meet the requirements of ICEA S-75-381 Paragraph 3.19.1.1. The ground check conductor is a flexible rope-lay stranded, tin coated annealed copper conductor insulated with 45 mils of a yellow insulating XLP compound. Three insulated power conductors are assembledround in a helical configuration with two grounding conductors, one ground check conductor, rubber fillers, as necessary, and with a suitable lay. The ground check conductor shall be placed in the valley between the black and white phase conductors. A rubber faced fabric tape is helically applied over the assembly with a 15% nominal overlap. A high strength reinforcement shall be applied as two reversed serves or as an open braid. Jacket is black, yellow, or orange as standard offering of heavy duty thermoplastic polyurethane (TPU). Alternate jacket colors are available for manufacture. Consult factory for details. Also available is in 25 kV construction. Specifications: MSHA listed Passes MSHA flame test (P-136-MSHA) Meets ICEA requirements OSHA acceptable Excellent resistance to oil, solvents, ozone, aging and abrasion Moderate flexibility Passes MSHA flame test (P-136-MSHA) Suitable for continous submersion in shallow water
