Net Wt. / Volume 400ml Description ●The foam adheres to and effectively kills mold on vertical surfaces, which was difficult to remove until now!●Contains a new adhesion ingredient that allows the bubbles to stay and work on mold on vertical surfaces.• Thoroughly removes mold from vertical surfaces such as walls, rubber gaskets under shelves, shower hoses, and other places where foam drips and is difficult to remove.●It has a gentle scent that is not acrid.●For refilling●Liquid: alkaline Cautions • Please do not use this product if you are not feeling well or have heart disease or respiratory disease.• Be sure to evacuate the area by opening windows and doors, turning on ventilation fans, etc. (Opening two or more places will increase the ventilation effect)• Wear cooking gloves, a mask, and glasses to protect your eyes.• Never use while bathing.★Precautions for use• Do not use for any other purpose.• Be careful where you place the product to prevent people with dementia from accidentally ingesting it.• Be careful not to get the liquid in your eyes.• Always use it alone. If mixed with acidic products, vinegar, alcohol, etc., harmful gases will be generated and can be dangerous.• Do not use a large amount at once or use it continuously for a long time.• Foreign-made tiles may change color, so be sure to test them in an inconspicuous area before using.• If you leave it dripping in the bathtub, it may discolor, so wash it immediately.• Be careful not to get the liquid on clothes or rugs as it will bleach the color.• Avoid direct sunlight and do not place in a high temperature place.• Do not store it upside down.• Do not drop it to avoid damage.[First aid explanation]• If it gets into your eyes, you may lose your eyesight. Do not rub, immediately rinse with running water for at least 15 minutes, and be sure to consult an ophthalmologist immediately even if there is no pain or abnormality.• If swallowed, do not vomit; immediately rinse mouth, drink 1 to 2 glasses of milk or water, and consult a doctor.• In case of contact with skin, immediately rinse thoroughly with water. If any abnormalities remain, consult a dermatologist.• If you get any stains in your eyes, cough, or feel unwell while using the product, stop using it, leave the area, wash your eyes, and gargle.• In both cases, please bring the product with you when visiting the doctor. Ingredients Hypochlorite, sodium hydroxide (0.5%), surfactant (alkylamine oxide), stabilizer How to Use ★How to use(1) Align the “out” of the nozzle tip with the ▲ mark. (Do not point at your face at this time)(2) Spray on mold stains from a distance of about 10 cm. (Never spray above the eyes. When using above the eyes, such as on the ceiling, apply the liquid on a rag etc.)(3) Leave it on for about 5 minutes, then rinse thoroughly with water.• For stubborn stains, it is effective to leave it on for 15 to 30 minutes.(4) After use, properly align the "stop" on the tip of the nozzle with the ▲ mark. Always wash your hands after working.★Estimated usage amount: Spray approximately 10 times per 1 square meter★Things that cannot be used• Animal hair brush• Wood products• Enamel, aluminum• Metal items such as brass (can cause rust)• Stucco walls, cross walls, decorative steel plate walls of some unit baths (steel plates are attached to magnets)• Rubber parts of bathtub plugs, etc.
