Net Wt. / Volume 700ml Description ●Super strong bath detergent that thoroughly breaks down stubborn water stains and soap scum.●Adjusted to be alkaline so that it can be used in combination with many mold removal agents whose main ingredient is sodium hypochlorite. Cautions • Do not use for other purposes• Be sure to wear protective equipment (safety glasses, cooking gloves, etc.)• Keep out of reach of children• Do not spray with the tip in the "stop" position. When set to "out", liquid may come out.• Use with good ventilation• When using at a position higher than the eyes, soak it in a sponge etc. and then wash it by stroking it.• Wash your hands thoroughly after use, and if you are concerned about your hands getting rough, use cream etc.• Do not spray towards people• If you are concerned about stains or discoloration, be sure to test it in an inconspicuous place before use.• Avoid using if you are allergic to detergent ingredients.• Do not store in places where there is a risk of freezing, in direct sunlight, near fire, or in places with high temperatures of 40 degrees or higher. Ingredients Surfactant (2.8% alkyl glucoside), solvent, sequestering agent, disinfectant How to Use • Turn the tip of the nozzle so that the "output" part is properly centered (do not point it at your face when operating the nozzle part).• Spray directly from a distance of approximately 15cm from the stain, then wash with a sponge, etc., and rinse thoroughly with cold or hot water.• After use, wash the remaining liquid in the spray nozzle and the liquid dripping into the container with water or wipe it with a cloth, etc., and be sure to return the nozzle tip to the "stop" position.• When using, be sure to wear protective equipment (safety glasses, cooking gloves, etc.).• If the liquid drips down the spray nozzle into the container, press the bottom of the container with a cloth before use.• For severe stains, it is effective to spray and leave for 2 to 3 minutes.• Do not spray directly on areas higher than the eyes, but let it soak into a sponge, etc. before washing.• To sterilize, wipe off the moisture, leave for 5 minutes, and rinse (this will not sterilize all bacteria).• Please be sure to test it in an inconspicuous area before use, as it may discolor on some bathtubs, floors, and walls. Country of Origin Japan Manufacturer Linley 03-3541-4851 Distributor Linley
