4ms Company STS Stereo Triggered Sampler Module

Chuck Levin's Washington Music Center Verified independent store

→

Turn Any Sound Into Music With The 4ms Company STS Stereo Triggered Sampler ModuleFirmware version v1.4: Less latency, envelope controls, quantized 1V/oct mode, easier drag-and-dro pping files and more!The Stereo Triggered Sampler is a high fidelity, two-channel stereo sample recorder and playback module. The STS can record high quality stereo files, while simultaneously playing two different stereo files. A maximum of 600 samples can be loaded from the removable/swappable microSD card, in a variety of formats up to 96kHz/32-bit/stereo WAV. All sample parameters (1V/oct pitch, sample file selection, length, and start position) are CV controllable.600 SAMPLES A maximum of 600 samples can be loaded at once, arranged into banks of 10 samples each. Samples and banks can be re-arranged on the fly using the simple on-board Edit features. Newly recorded samples can be instantly played back and re-pitched, reversed, chopped up, etc... the result of which can even be bounced down and re-recorded to as a new sample! Sample files are limited to 4GB each, which is over 6 hours at 44k/16b/stereo. TWO STEREO PLAYBACK CHANNELS Each playback channel has a knob and CV jack for Sample File selection, as well as a Start Position knob and CV jack for controlling where in the sample playback will begin. The Length knob and CV jack determine how much of the sample is played back: from tiny grains, to percussive hits, to longer loops... or just the entire file. These are powerful tools for re-arranging a sample, joining multiple samples, and creating dynamically re-sized loops within a larger sample. Combined with the Play Trigger jack and the 1V/oct jack, the STS can be two complete multi-timbral pitch-tracked stereo voices! There's also a Reverse button and jack for backwards playback, and an End Out jack for synchronizing loops, or cascading sample playback with other events.LOOPING AND SYNC Looping is easy: just hold the PLAY button down for two seconds to toggle loop or one-shot. The loop timing clock will output from the End Out jack. Or, send a clock into the Play Trig jack to sync the loop to external timing.STEREO RECORDING Whether you patched 47 modules to create the ultimate percussive blast, or you want to capture your four hour ambient performance, recording high-quality .wav files on the STS is simple. Just hit the REC button or fire a trigger and a new stereo .wav file will be created on the SD card. Do as many takes as you need: the STS never deletes your files. Re-ordering or re-arranging samples into banks is easy, even without a computer.You can even fill a bank with 10 different variations and immediately use them for playback. By default the STS records at 44.1kHz/16-bit, with an option for 24-bit (a future update may increase the sample rate to 96kHz)EASY SAMPLE LOADING Using a computer is completely optional with the STS, since samples can be recorded directly to the module and placed into the bank of your choosing. But for users with large existing sample banks, the intuitive automatic bank loading features make dragging and dropping your entire sample library a snap. You never have to rename your files again! Up to 600 samples can be active in banks at one time (10 samples per bank) Hundreds of samples included on microSD card Extremely quiet, low noise and low jitter design Stereo or Mono operation: Stereo mode: Two stereo files are mixed and played through the L and R output jacks (L+L and R+R) Mono mode: Each file is mixed to mono and output through the channel's output jack (L+R and L+R) Firmware can be updated by playing an audio file into the STS TWO INDEPENDENT PLAYBACK CHANNELS: Each channel can output in mono or stereo through the shared L/R jacks Play button/trigger jack: Tapping the button or receiving a trigger starts/re-starts the sample When Length is set to "All", the Play button starts/stops the sample (see System Mode p.21) Sample CV/knob: select which sample within the channel's bank 1V/OCT CV and Pitch knob: playback pitch (-10 to +4.3 octave range) Start Pos CV/knob: position in the sample to begin playback (loop start point) Length CV/knob: playback time (loop end point) Length knob at max: entire file is played Length knob 50%-99%: 200ms - 5s of the sample is played (beginning at the Start Position) Length knob Show more