4MS RCD BREAKOUT

Moog Audio Verified independent store

→

The breakout module for the Rotating Clock Divider has to be connected to the internal jumpers of the RCD and allows for switching the division factors, counting direction and auto matic reset. The RCD Breakout adds features to the Rotating Clock Divider module. Six switches allow you to set the maximum Divide-by amount, Gate or Trigger mode, Counting mode, Spread mode, and Auto-Reset. The RCD Breakout requires the RCD to function, and does not use any extra power. Features Divide-by-1 to Divide-by-64, on 8 output jacks CV Rotate jack to shift divide-by amount on each jack CV Reset jack to reset/re-sync all jacks Optional break-out panels to expand functionality (Auto-reset, selectable Divide-by range, Gate/Trigger, Up/Down-counting) Jacks Clock Input (5V to 15V clock, rising edge triggered), max 3kHz CV Rotate (0V to +5V input) CV Reset (5V to 15V trigger) Divided Clock Outputs (8 jacks): Divide-by-(1+R) Divide-by-(2+R) Divide-by-(3+R) Divide-by-(4+R) Divide-by-(5+R) Divide-by-(6+R) Divide-by-(7+R) Divide-by-(8+R) ...where R is the CV Rotation. Selectable Gate/Trigger mode: Selectable Divide range up to Divide-by-64: Two jumper pins on the back can be pre-set with jumpers plugs, or used with (forthcoming) breakout panel. Selectable Auto-reset: Auto-reset will reset the divide counter every 16/24/32 clocks, which keeps the beats more "dance-able" even when using the "weird" clock divisions (3/5/6/7/9/10/11/etc..) Two jumper pins on the back can be pre-set with jumpers plugs, or used with (forthcoming) breakout panel. Module size: The RCD is 4HP and 48mm (1.85") Power consumption: +12V rail: __mA +5V rail: not used -12V rail: not used Show more