(Decals in 1 full piece will not come with an application mask)1. Clean the surface area where the decal will be applied with alcohol and water.2. Adhere the extra strip of application mask on top of your decal, to establish the exact location.3. Measure location to make sure the decal is centered and straight (measure from the actual decal, not the paper backing. It is not guaranteed that the paper will be straight).4. Slowly remove the paper backing, starting with the top, while smoothing the decal side to side with a scraper or credit card.5. Apply the decal to your surface and smooth (again) with a credit card.6. Remove the application mask carefully. Some areas may need to be scraped down again.**When placing the decal on a vehicle, try to place it out of the way of the vehicle wipers. Wiper blade use over a decal can lift edges causing moisture to get underneath and lift/ruin your decal.You will be provided with these instructions also in your package, and a small sample vinyl decal to practice the application with.
