Description Leak Proof Features: Heavy-duty plastic construction. Suggested use Indication for use: For storage of soft (hydrophilic), hard, and rigid gas permeable (fluoro silicone acrylate and silicone acrylate) contact lenses during chemical disinfection. Use for storage during chemical disinfection only. Do not use during heat disinfection. Directions for Use: Before First and After Each Additional Use Rinse lens case and caps thoroughly with fresh contact lens disinfecting solution. Chemical Disinfection Clean and rinse contact lenses as directed by your eye care practitioner and the directions provided with your contact lens care disinfecting solution. Place contact lenses into their correct chamber of the contact lens case, fill with fresh contact lens disinfecting solution, and tightly close the caps. Leave the contact lenses in the lens case according to the directions provided with your contact lens disinfecting solution. Important: If a lens chamber continues to dry out, the case should no longer be used and should be replaced. For Good Contact Lens Care: Clean contact lens cases with digital rubbing using fresh, sterile disinfecting solutions/contact lens cleaner. Never use water. Cleaning should be followed by rinsing with fresh, sterile disinfecting solutions (never use water) and wiping the lens cases with fresh, clean tissue is recommended. Never air-dry or recap the lens case lids after use without any additional cleaning methods. If air drying, be sure that no residual solution remains in the case before allowing it to air dry. Replace your lens case at least every 3 months or according to the directions given you by your eye care practitioner. Contact lens cases can be a source of bacterial growth. Warnings Do not store your lenses or rinse your lens case with water or any non-sterile solution. Only use fresh multi-purpose solution so you do not contaminate your lenses or lens case. Use of non-sterile solution can lead to severe infection, vision loss or blindness. Soaking and Storing Your Lenses. Instruction for Use: Use only fresh multi-purpose (contact lens disinfecting) solution each time you soak (store) your lenses. Do not reuse or “top off” old solution left in your lens case since solution reuse reduces effective lens disinfection and could lead to severe infection, vision loss or blindness. "Topping-off" is the addition of fresh solution to solution that has been sitting in your case. Rub and Rinse TimeInstruction for Use: Rub and rinse your lenses for the time recommended with your contact lens disinfecting solution (e.g., 10 seconds or more) and then repeat with the second side for a total of 2 times (e.g., 20 seconds or more). Follow the complete recommended lens rubbing and rinsing times in the labeling to adequately disinfect your lenses and reduce the risk of contact lens infection. Rub and rinse your lenses for the recommended amount of time to help prevent serious eye infections. Never use water, saline solution, or rewetting drops to disinfect your lenses. These solutions will not disinfect your lenses. Not using the recommended disinfectant can lead to severe infection, vision loss or blindness. Water ActivityInstruction for Use: Do not expose your contact lenses to water while you are wearing them. Discard Date:Instruction for Use: Discard any remaining solution as stated on your bottle of contact lens disinfecting solution after opening. Using your multi-purpose solution beyond the discard date could result in contamination of the solution and can lead to severe infection, vision loss or blindness. Note: The discard date is different than the expiration date. The expiration date is the last day the contact lens solution is safe to use before it has been opened. The discard date is the time that the contact lens solution is safe to use once the bottle has been opened. Use for storage during chemical disinfection only. Do not use during heat disinfection.
