Pro Tool Holster Kit - SKU 5130TH Pro Tool Holster The Spider Pro Tool Holster is a durable, easy to use ergonomic carrying system for power tools that clips onto any tool belt or casual belt. The Pro Tool Holster has a self-locking design that secures your tool each time a tool is inserted. To unlock the holster, lift the lock lever with your thumb – and take your tool out of the holster. This is designed to be done one handed! The Spider Holster system makes it quick and easy to access and carry any power drill, driver, tape measure, hammer, pneumatic, multi-tool, reciprocating saw, flashlight and more! The Holster features an ambidextrous lock that can be installed either right or left-handed for optimal use. You can then use multiple holsters on your belt, enabling you to keep all of your tools safe and easily reachable. The Pro Tool Holster is designed to fit clips up to 3"The Holster's metal clip is made of quality, high strength spring steel. The clip is also curved at the end, adding extra security by capturing full width of your belt. Note for Spider Pro Tool Tether users: The Pro Tool Holster is designed to allow you to insert both the Pro Tool Tether AND your Spider equipped tool into the holster at the same time. This allows you to have your tool securely tethered and have that tool locked into the Spider Holster, giving you double the security! Pro Tool Holsters are compatible with all Spider Tool Holster products. Drill PinSpider Drill Pins are the premier solution for pairing your Spider Tool Holster / Pro Tool Holster with a power drill / driver. The Drill Pin attaches directly to the threaded port where the OEM drill clip is installed. The screw threads on the drill clip mount vary from brand to brand, so we provide three custom Spider Bolts (M3, M4, #6-32) which will allow you to mount the Spider Drill Pin onto most major brands. Spider Drill Pins are compatible with Dewalt, Milwaukee, Bosch, Ryobi, Kobalt, Makita, Ridgid, Metabo HPT and more! The Drill Pin is made from a highly durable composite nylon and the Spider Bolts are made from stainless steel, both of which can withstand daily wear and tear in any work environment. DRILL PIN NOTES:- On Milwaukee M12 Drivers with Model # 3XXX-XX (GEN3) , you need to use the #6-32 Spider Bolt - The Drill Pin will fit on Metabo HPT (US) drill / drivers, but will NOT fit on Metabo (EU) tools, as they use an M5 bolt which does not fit our Drill Pin.- The Spider Bolts require a 3/32" allen wrench (not included) to tighten / attach to your drill. Designed for use with our Tool Holster*, Pro Tool Holster, or Tool Docks*. (sold separately*) Pro Tool Grip Spider Pro Tool Grips are a safe, durable, and highly versatile worm drive hose clamp solution for outfitting your tools to work with the Spider Holster system The Pro Tool Grip is designed to secure around the handle of any tool from 1⅛"⌀ to 2¼"⌀ diameter, such as a pneumatic nailer, power drill, impact driver, reciprocating saw, flashlight, and more! The Pro Tool Grip’s built-in Spider Pin is designed to be low profile so it stays out of the way of your hand while working. That Spider Pin inserts and locks into the Spider Tool Holster / Tool Dock. Pro Tool Grips are made from a highly durable DuPont® resin that can withstand the daily wear and tear of a jobsite. The DriveLock™ worm screw is specially designed to provide constant tension without risk of backdriving or loosening over time. After tightening the DriveLock insert using a 1/8" hex wrench, any excess material can be trimmed to length as needed. How to Install Pro Tool Grip: 1. Wrap the Pro Tool Grip around your tool's handle. 2. Once tight, thread in the DriveLock™ insert using a 1/8" hex wrench , the Pro Tool Grip is now ready for use! (wrench not included) Designed for use with our Tool Holster*, Pro Tool Holster, or Tool Docks*. (sold separately*) Pro Tool TabPeel-and-stick Spider Pro Tool Tabs are the perfect way to carry both flat surfaced and curved surfaced hand tools from your Spider Tool Holster. Perfect for tape measures, hammers, mallets, flashlights, wrenches, and many more! Made from a highly durable composite nylon and genuine 3M adhesive, the Pro Tool Tabs are made to withstand daily wear and tear in any work environment. The unique profile of the Spider Pro Tool Tabs prevents tool rotation and bouncing, while allowing them to lock securely into our Spider Tool Holster. When used on a hammer, the Pro Tool Tabs are quicker and more ergonomic than using a traditional hammer loop. It is easier and safer to insert your hammer into a locking Spider Holster than to fumble around with a tool belt loop, Especially so if your tools are required to be tethered for working at height. How to install onto FLAT SURFACED tools (such as a tape measure)1. Remove OEM belt clip (if applicable)2. Thoroughly clean the surface of your tool with isopropyl alcohol 3. Peel the 3M adhesive backing and press the Tool Tab firmly in place for one minute 4. Allow 24 hours before stressing the Tool Tab for the adhesive to properly cure. 5. For added security when applying to tape measures, insert the OEM screw through the provided counterbored hole of the Tool Tab and tighten in place. How to install onto CURVED HANDLED tools (such as a hammer)1. Thoroughly clean the surface of your tool with isopropyl alcohol 2. Peel the 3M adhesive backing and press the Tool Tab in place for one minute 3. Insert the provided cable ties through the slots on the base of the Pro Tool Tab. 4. Once secured, the cables should be trimmed flush. Designed for use with our Tool Holster*, Pro Tool Holster, or Tool Docks*. (sold separately*) BitGripper Spider BitGrippers allow you to carry up to 6 bits on the side of your power drill + driver! BitGrippers make carrying and swapping out your bits secure, fast and easy. Constructed from a durable, yet flexible rubber, BitGrippers feature a simple peel-and-stick application using high strength, genuine 3M adhesive that securely attaches it to the side of any flat or curved surface. BitGrippers can be conveniently mounted on the side of your drill without blocking the vent ports, as well as the the top, or anywhere on the battery. Each BitGripper contains three hollow channels that hold inserted bits securely in place. These channels allow each BitGripper to hold up to 6 short driver bits, or three longer bits such as a step drill, holesaw, sawtooth, auger, space, countersink, brad point, twist, masonry, tile, forstner, rivet, vix, step drill, plug cutter, extended clearance, and HSS (high speed steel) bits. It also works for holding pencils! We recommend outfitting multiple BitGrippers to one drill so you never have to fumble around in your pockets & pouches for your gear when you need them most. Magnetic BitGripper Three high strength embedded magnets allow Spider Magnetic BitGrippers to securely carry up to 6 bits on the side of your power drill + driver! Constructed from a durable, yet flexible rubber, Magnetic BitGrippers feature a simple peel-and-stick application using high strength, genuine 3M adhesive that securely attaches it to the side of any flat or curved surface. Magnetic BitGrippers can be conveniently mounted on the side of your drill without blocking the vent ports, as well as the the top, or anywhere on the battery. Each Magnetic BitGripper contains three channels with a magnet embedded in the center. These magnets allow each Magnetic BitGripper to hold 6 short driver bits inserted bits securely in place. They also work great for holding screws and bolts! We recommend outfitting multiple Magnetic BitGrippers to one drill so you never have to fumble around in your pockets & pouches for your gear when you need them most.
Related
Related
Related
Related