Description This part is responsible for letting water into the washing machine. These parts might need replacement if your washer is not filling properly, or if it isn’t filling at all. UPC #: 810019171796 Cross Reference Information 5220FR2075L, 5221ER1003A, 5221ER1003C, 5221ER1003D, 5221ER1003F, PS11728995, B01GXOY74Q. Quality you can Trust! All Snap Products are made with premium materials and are tested so they last. Click here for installation instructions! Compatible with the following Washer brands: LG ASIN #: B07B4LXY7Y Just because parts look the same does not mean that they are the same. Use the model numbers below to ensure that this part is compatible with your appliance! All Snap parts come with installation instructions to help you with your repair. If you need more help, you can always contact us for further assistance. Email us at [email protected] or give us a call at 1-877-269-0086. Model Numbers Use ctrl+F then enter your model number in search bar and hit enter WM2077CW (ABWEEUS) WM2277HW (ABWEEUS) 79640021900 79640272800 79640272900 79640311900 79640318900 79640512900 79640518900 79641532110 79641538110 WM1812CW (ABWEEUS) WM1814CW (ABWEEUS) WM1815CS (ATTEEUS) WM2010CW (ABWEEUS) WM2016CW (ABWEEUS) WM2050CW WM2075CW (ABWEEUS) WM2101HW (ABWEEUS) WM2140CW WM2233HD (AFGEEUS) WM2233HS (ATTEEUS) WM2233HU (ABBEEUS) WM2233HW (ABWEEUS) WM2240CW WM2250CW WM2277HB (ABPEEUS) WM2277HS (ATTEEUS) WM2301HR WM2301HW WM2350HRC WM2350HWC WM2455HG (APGEEUS) WM2455HW WM2496HSM (ATTEEUS) WM2496HWM (ABWEEUS) WM2601HL WM2601HR WM2601HW WM2650HRA WM2650HWA WM2655HVA WM2677HBM WM2677HSM (ATTEEUS) WM2677HWM WM2701HV WM3050CW WM3070HRA WM3070HWA WM3150HVC WM3150HWC WM3170CW (00) WM3250HRA WM3250HVA WM3250HWA WM3370HRA (00) WM3370HVA (00) WM3370HWA (00) WM3370HWA (01) WM3470HVA WM3470HWA (00) WM3470HWA WM4070HVA WM4070HWA WM4270HVA (00) WM4270HWA (00) WM5000HWA WM8000HVA WM8000HWA WM8500HVA WM9000HVA WM9000HWA Installation Instructions Installation Instructions for 5221ER1003A Tools Needed: Pliers Screwdriver Unplug appliance and/or turn off circuit breakers to prevent electrocution. Turn off water supply. Remove water fill hose with pliers, set aside. Remove lower screws that hold the bracket to the body of the washer, pull the top and lift. Make sure to know where the wires and tubes go. Recommended to take a picture and/or mark the hose with a marker. Pull out wire harnesses, place a towel under the hose and with pliers remove the clamps and pull the hoses off. Remove the two screws that secure the valve in place and remove the valve. To replace the valve, place the water valve in, and place the screws back on. Place the water hoses back on and place clamps back on. Reattach the wire harness. Place the top back on, replace the screws and reattach the water fill hose. Turn water supply on, turn on appliance, and installation is complete.
Related
Related
Related
Related