111-711-115AGR German VW Shifter Boot – Manual Air-Cooled Models

IPC - Import Parts Connection Verified independent store

→

VW Manual Shifter Boot (German Quality) – 111-711-115AGR The 111-711-115AGR is the premium, German-manufactured version of the classic floor shifter boot. This "GR" (German) design ated part is favored by restorers over standard reproductions because it uses a higher-grade rubber compound that closely mimics the texture, flexibility, and longevity of the original factory equipment. Its primary role is to seal the base of the gear shifter assembly against the center tunnel, preventing road noise, heat, and transmission odors from entering the cabin. Because the shifter is a high-movement area, lower-quality boots often crack or tear within a few years of use. This German-made version is engineered to withstand the constant stretching of gear changes while remaining supple. It features the correct accordion-style bellows and a precise base lip that snaps securely over the shifter base, providing a clean, professional finish to any vintage VW interior. Detailed Vehicle Compatibility This boot is designed for standard manual shifters in the following models: VW Beetle (Standard): 1949, 1950, 1951, 1952, 1953, 1954, 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977 VW Super Beetle: 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979 VW Karmann Ghia: 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974 VW Bus (Type 2): 1950, 1951, 1952, 1953, 1954, 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966 VW Type 3: 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973 VW Thing: 1973, 1974 Product Highlights & Features Genuine German Rubber: Superior resistance to UV rays and temperature fluctuations compared to standard economy versions. Accordion Design: Engineered with the correct number of bellows to allow full range of motion for both short-throw and stock shifters. Authentic Matte Finish: Matches the original interior trim for a concours-level restoration look. Easy Installation: Stretches over the shifter handle and seats firmly onto the base plate without the need for adhesives. Technical Specifications Part Number: 111-711-115AGR Material: EPDM Rubber (German Grade) Color: Black Fitment: Manual Transmission Only Installation & Maintenance Tips Heat it Up: If you are installing this in a cold climate, soak the boot in warm water for a few minutes before installation. This makes the rubber more pliable and easier to stretch over the shifter knob/handle. Remove the Knob: While some shifters allow the boot to stretch over the knob, it is usually safer to unscrew the shifter knob first to avoid over-stretching or tearing the top hole of the boot. Check the Base Plate: Ensure your shifter base plate is bolted down tightly before seating the boot. If the plate is loose, the boot may pop off during shifts into 2nd or 4th gear. Cleaning: Use a silicone-based rubber protectant occasionally to keep the rubber from drying out and to maintain that deep black factory look. 111711115AGR Show more