A timer allows for controlling of your heated bathroom towel rails so that you can simply set you schedule and forget, whilst experiencing warm dry towels. The Eco Timer is a simple timing device designed to go behind the switch plate (not included). The timer operates on a 12 hour schedule meaning it will be on at the same time morning and evening each day of the week. The programmed timer can be selected for a period from 1 to 11 hours and three heat settings can be selected: 50%, 75% or 100%. The timer is operated using the switch, when you turn the timer on it will start to beep, each beep represents one hour, if you want the rail on for 4 hours wait for 4 beeps, switch the timer off and then back on again and it will do another 4 beeps to confirm it has been set for 4 hours. The rail will come on at the time you set it eg 4pm for four hours and then again at 4am for four hours. The Eco Timer is a very cost effective and simple to operate option although it doesn't offer the same user flexibility as a programmable timer. Can I wire multiple rails to one timer? Yes, absolutely, you can connect more than one heated towel rail to a single timer. There are just a few things to consider; Firstly, you cannot exceed the 1 amp load rating of this timer and, secondly, all the rails wired to one timer will be on at the same time, they cannot be set on individual schedules. The addition of a timer makes your life simple and rewarding with warm towels everyday and wiring multiple rails to one timer allows you to achieve this result easily and beautifully. Can I control multiple rails independently from the one timer? Although it is perfectly safe to wire more than one rail to the one timer, and many clients choose to do so where they have multiple rails in one room, it is important to note that you cannot control these rails on independent schedules from the one timer. As our Thermorail timers are all simply on/off timing devices, they will switch the whole load that is wired in, meaning all rails will turn on/off at the same time. Should you wish to control multiple rails independently, you will need to have these wired to individual timers or switches. Can Thermorail timers be used for other products? As our Thermorail timers are all simply on/off timing devices with a 240volt output, they can be used to control any 240volt towel rail, appliance or lights. If you are considering using a Thermorail timer for another product, always ensure you do not exceed the amperage load of the timer and bear in mind that this can only be used to switch the load on or off as desired and cannot be used to control it in any other way, such as adjusting temperature or dimming the light. Can I use a Thermorail timer for Low Voltage Heated Towel Rails? Yes, sure you can! Whilst our Low Voltage Towel Rails are 12volt units and the timers have a 240volt output, a transformer is required for these rails anyway so the Towel Rail can simply be wired into the 12volt side of the transformer, then the 240volt side of the transformer wired into the timer. The timer then switches the transformer, rather than the rail itself, which effectively turns the Towel Rail on or off as set on the timer.
Related
Related
Related
Related