PMD ISOLATION KIT Fits 2WD and 4x4 1994-2000 Chevy and GMC 6.5L Turbo Diesel Dieselsite's PMD Isolator System is a complete relocation kit that includes everything you need for the installation, including a new PMD module. The PMD Isolator System comes ready to bolt on, has a resistor pre-installed, and an extension harness to relocate it to the front of the vehicle. The PMD Module is pre-mounted to the heat sink plate and the extension harness is already plugged in and ready to go. We see many imitators relocating the PMD from the pump to other places under the hood. This serves no purpose as the PMD is still subjected to the "under the hood" heat source- the engine. To add to that, the heat sink they mount to the "relocated" PMD does as much or more to absorb heat than remove it. We move the PMD outside the engine compartment to receive wind to aid in cooling. We also use a thermally conductive adhesive bond between the PMD and the plate to also aid in heat transfer from the PMD through the plate. What many dont realize is the PMD itself produces enough heat to degrade the internals. The PMD is weather sealed and protected from rain, ice, mud, and debris. It is backed by lifetime warranty to original purchaser. The Bracket in this kit is designed for GMT400 vehicles Only. See photos below and verify fitment before purchasing. FOR INSTRUCTIONS CLICK HERE Pictures below are taken both from our 3D print prototype (to help visualize location) and with production Aluminum Heat Sink Plate. See the instructions above for actual install instructions and photos.
